Modeling of Electric Vehicle Charging Load in Different Areas of Distribution Network

Electric Vehicle Charging Modeling

With an electrified passenger transportation fleet, carbon dioxide emissions could be reduced significantly depending on the electric power production mix. Increased electric power consumption due to electric vehicle charging demands of electric vehicle fleets may be met by increased amount of renewable power production in the electrical systems. With electric vehicle fleets in the transportati...

Different Electric Vehicle Charging Strategies to avoid Reducing the Insulation Oil Lifetime of Distribution Transformers

Abstract: The widespread presence of uncontrolled electric vehicles causes overloading of distribution network equipment. One of these equipments is distribution transformer, which should pay attention to overloading and reducing lifetime of this equipment due to charging of electric vehicles. First, strategies have been proposed to investigate the effect of electric vehicle penetration level a...

Multi-Objective Distribution Network Expansion Incorporating Electric Vehicle Charging Stations

Abstract: The paper develops a multi-objective planning framework for distribution network expansion with electric vehicle charging stations. Charging loads are modeled in the first place, and then integrated into the optimal distribution network expansion planning. The formulation is extended from the single objective of the economic cost minimization into three objectives with the additional ...

Impacts of Electric Vehicle Charging on Electric Power Distribution Systems

development and implementation of an optimized control strategy for induction machine in an electric vehicle

in the area of automotive engineering there is a tendency to more electrification of power train. in this work control of an induction machine for the application of electric vehicle is investigated. through the changing operating point of the machine, adapting the rotor magnetization current seems to be useful to increase the machines efficiency. in the literature there are many approaches wh...