Modeling of CO2-LPG WAG with asphaltene deposition to predict coupled enhanced oil recovery and storage performance

Influence of CO2 Dissolution and Asphaltene Precipitation on Oil PVT and Recovery

MODELING OF ASPHALTENE DEPOSITION IN PIPELINES

This paper is concerned with asphaltene deposition in fluid flowing through pipelines. Brownian diffusion and drag, gravitational, thermophoresis, buoyancy, and shear removal are considered as possible mechanisms in the asphaltene deposition process. The thermo-physical properties of the fluid were obtained from Iranian oil fields. A model was used in the pipeline deposition modeling to predict...

Increasing CO2 Storage in Oil Recovery

Carbon dioxide (CO2) injection has been used as a commercial process for enhanced oil recovery (EOR) since the 1970’s. Because the cost of oil recovered is closely linked to the purchase cost of the CO2 injected, considerable reservoir engineering design effort has gone into reducing the total amount of CO2 required to recover each barrel of oil. If, on the other hand, the objective of the CO2 ...

An Experimental Study of Surfactant Alternating CO2 Injection for Enhanced Oil Recovery of Carbonated Reservoir

Core flooding experiments were conducted with the objective of evaluating near miscible surfactant alternating CO2 injection and the effect of surfactant concentrations on gas-oil and water displacements in porous media. The core samples were provided from a low permeability mixed wet oil reservoir at 156 °F and 1900 psia. In addition, very few studies of surfactant adsorption on car...

Enhanced Oil Recovery and CO2 Flooding/Sequestration in Carbonates