Modeling Metadynamic Recrystallization of a Die Steel during Ingot Breakdown Process
نویسندگان
چکیده
منابع مشابه
Study on Static Recrystallization Process in Duplex Stainless Steel 2205
Steel 2205 is one of the most famous duplex stainless steels. The microstructure of this steel composed of ferrite and austenite in similar amount. Therefore, in order to improve mechanical properties through microstructure, thermo mechanical processes such as controlled hot rolling and forging should be applied. It is not possible to employ the usual heat treatment. It shows the importance of ...
متن کاملSimulation of Convection and Macrosegregation in a Large Steel Ingot
segregates. Although good agreement with experiments was MACROSEGREGATION in large steel ingots is one achieved, the model relied on many approximations (such of the most well-known and now classical problems in the as estimating the flow velocities). It should also be menfield of solidification and casting.[1] It arises from the relative tioned that many models have appeared in the literature ...
متن کاملDynamic Recrystallization under Hot Deformation of a PH Stainless Steel
Dynamic recrystallization, DRX, behaviour of a precipitation hardened, PH, stainless steel was studied in connection with microstructural developments in a compression test. The experimental results showed that the dominant mechanism of softening is DRX, but at high strain rates and low temperatures, ie, high Zener-Holman parameter, Z, work hardening and dynamic recovery, DRV, produced a pancke...
متن کاملState of the Art in the Control of Inclusions during Steel Ingot Casting
This article extensively reviews published research on inclusions in ingot steel and defects on ingot products, methods to measure and detect inclusions in steel, the causes of exogenous inclusions, and the transport and entrapment of inclusions during fluid flow, segregation, and solidification of steel cast in ingot molds. Exogenous inclusions in ingots originate mainly from reoxidation of th...
متن کاملKinetics of Austenite Recrystallization during the Annealing of Cold-rolled Fe-Mn-Al-C Steel
In the current study, the recrystallization behavior of 75% cold-rolled Fe-22Mn-10Al-1.4C steel during annealing at 750, 770, 790, 810, and 830°C was studied. X-ray diffraction patterns and optical microscopy were used to characterize microstructures. The Vickers Micro-hardness test was used to characterize recrystallization kinetics during annealing. Johnson-Mehl-Avrami-Kolmogorov (JMAK) model...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATEC Web of Conferences
سال: 2016
ISSN: 2261-236X
DOI: 10.1051/matecconf/20168006004