Modeling Geomagnetic Interference on Railway Signaling Track Circuits
نویسندگان
چکیده
منابع مشابه
Real Time Railway Traffic Management Modeling Track-Circuits
The real time railway traffic management seeks for the train routing and scheduling that minimize delays after an unexpected event perturbs the operations. In this paper, we propose a mixedinteger linear programming formulation for tackling this problem, modeling the infrastructure in terms of track-circuits, which are the basic components for train detection. This formulation considers all pos...
متن کاملInfluences of Railway Track Geometry Parameters on Ground-Borne Vibration
One of the most important challenges in the development of urban railways network is the effects of railway vibrations on human and adjacent structures. Although various investigations into the sources of railway vibrations have been conducted, very few research works have been reported on the influences of track geometry parameters on the level of vibrations. This is addressed in this resea...
متن کاملInvestigation of the Influences of Track Superstructure Parameters on Ballasted Railway Track Design
The main design criteria of ballasted railway tracks include rail deflections, rail bending stresses, rail wheel contact stresses, sleeper bending moments and ballast sleeper contact pressures. Numerous criteria have been defined for the design of ballasted railway tracks owing to the various mechanical properties of track components and their complex interaction. Therefore, railway track desig...
متن کاملProbability Distribution Modeling of the Interference of the Traction Current in Track Circuits
As a main interference to track circuit signal, the interference of the traction current(ITC) will directly influence the transmission quality of track circuit signal and even lead to signal distortion which would endanger the traffic safety. The ITC has a complicated formation mechanism and it is affected by factors of train compositions, load and running speed, so it is hardly possible to est...
متن کاملSquare Joints in Railway Track Waves
When rails are laid in a railway track, small gaps are left between the ends of adjoining rails to allow for the expansion of the rails when the temperature rises. Rail joints are provided to form a continuous rail path which are normally laid in standard lengths bolted together by fishplates. When two rail joints are exactly opposing each other, they are called square (side by side) joints...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Space Weather
سال: 2021
ISSN: 1542-7390,1542-7390
DOI: 10.1029/2020sw002609