Modeling for Gasification of Polyethylene by Partial Combustion in Fluidized Bed with Conical Gas Distributor.

Conical Fluidized Bed with Arc Design for Improved Performance of Gas Distributor

Particles distributions along a conical fluidized bed were predicted by an alternative arrangement of the minimum fluidization velocity equation. The proposed approach introduces two new equations which present the particle diameter in the bed as function of: height in the bed (Z), angle of inclination of the fluidized bed wall (θ), input flow rate (Qo), and gas distributor diameter (Do, 2ro). ...

GASIFICATION vs COMBUSTION OF WASTE/BIOMASS IN FLUIDIZED BED REACTORS

This paper presents a comparison of commercial fluidized bed gasifiers and combustors used to recover energy from municipal solid wastes and biomass. The work reported here is excerpted from four case studies prepared for the International Energy Agency’s Bioenergy Agreement, under Task 23 (Energy from Thermal Conversion of MSW and RDF, 1998-2000) and Task 36 (Energy from Integrated Solid Waste...

Unsteady-State Modeling of the Fluidized Bed Polyethylene Reactor

CFD Modeling of TiO2 Nano-Agglomerates Hydrodynamics in a Conical Fluidized Bed Unit with Experimental Validation

In the computational fluid dynamics (CFD) modeling of gas-solids two phase flow, the effect of boundary conditions play an important role in predicting the hydrodynamic characteristics of fluidized beds. In this work, the hydrodynamics of conical fluidized bed containing dried TiO2 nano-agglomerates were studied both experimentally and computationally. The pressure drop ...

Biomass Gasification in Fluidized Bed Gasifiers Modeling and Simulation

Using woody biomass as a resource for production of biofuel, heat and power through gasification has been studied for years. In order to reduce the cost of operating and to design the full-scale gasification plant developing a general model to be applicable for different ranges of input data with acceptable level of accuracy, is needed. In order to develop such model for the gasifier, as the ma...