Modeling and Simulation of a lab-scale Fluidised Bed
نویسندگان
چکیده
منابع مشابه
Modeling and Control of a Fluidised Bed Dryer
In this paper, the modelling and control of the moisture content of the particles in a batch Fluidised bed dryer are studied. First, a lumped mechanistic model is developed to describe the heat and mass transfer between solid, gas and bubble phases and experimental validation shows that the model can be used to predict the particle moisture content and temperature profiles during the drying pro...
متن کاملFluidised bed drying of soybeans.
The fluidised bed drying characteristics of soybeans at high temperatures (110-140 degrees C) and moisture contents, 31-49% dry basis, were modelled using drying equations from the literature. Air speeds of 2.4-4.1 m/s and bed depths from 10 to 15 cm were used. The minimum fluidised bed velocity was 1.9 m/s. From a quality point of view, fluidised bed drying was found to reduce the level of ure...
متن کاملA Study of Fluidised Bed Granulation
I\I: ei:peril1lr~n:al s+;udy 01' f l L!idis2d ~eci 0ranulatiu.l is pre~ent2d. Preliminury ex~e;ililentc, est?~,;lisn the mCl i 1-, variabl'_s in the granulation pr'ocess and er.able a systemc.tic cxperimcr.tal programme to be Jevised. In this programrre, f';ither glass p(jwdel~ Ol~ po,ous alum~na are used as the bed rrateY·ial. The ef'ft~cts of the f:.mdame!1tal fluiciised bed granulation param...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Lab and Field Scale Modeling of Near Miscible CO2 Injection in Different Porous Mediums
The main purpose of this investigation is to study the effect of near miscible CO2 injection in different porous mediums on both lab and field scales. This effect can be traced by the change of two-phase gas-oil relative permeability curves. In this work, the experiments have been performed on three rock types (i.e. sandstone, dolomite, and artificial fractured sandstone) based on an incrementa...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Modeling, Identification and Control: A Norwegian Research Bulletin
سال: 2002
ISSN: 0332-7353,1890-1328
DOI: 10.4173/mic.2002.2.3