Modeling and Optimization of Hard Turning Operation on 41Cr4 Alloy Steel Using Response Surface Methodology
نویسندگان
چکیده
منابع مشابه
Experimental Study of Induced Vibration and Work Surface Roughness in the Turning of 41Cr4 Alloy Steel using Response Surface Methodology
This study investigates experimentally the relationship between induced vibration and surface roughness in turning of 41Cr4 Alloy steel using Response Surface Methodology RSM. The levels of process cutting parameters in the study are limited to the following data; Depth of cut (1.0, 2.0, 3.0 mm), cutting speed (260, 320, 400 rpm), feed rate (0.15, 0.20, 0.30 mm/rev), tool nose radius (0, 1, 2 m...
متن کاملOptimization of Centrifugal Casting Parameters of AlSi Alloy by using the Response Surface Methodology
Centrifugal casting is one of the advanced casting branches widely used in the metallurgical industry in which the centrifugal force helps strengthen the workpiece material. The present work attempt to study the effect of the horizontal and vertical centrifugal casting parameters included the centrifugal mold rotation speeds and G-factors values on the quality of the product. The work has been ...
متن کاملEmpirical modeling of Hard Turning process of Inconel using Response Surface Methodology
In turning process, engineers are often faced with the problems of relating the cutting parameters (Speed, feed, depth of cut) to the output responses(Feed force, Thrust force, Cutting force, Surface roughness) to optimize the process. Also, Turing is done with the aim of achieving the best surface finish. But without optimization, it is not possible to automate the process. Turning process inv...
متن کاملModeling and Optimization of Arsenic (III) Removal from Aqueous Solutions by GFO Using Response Surface Methodology
Arsenic is a highly toxic element for human beings, which is generally found in groundwater. Dissolved Arsenic in water can be seen as As+3 and As+5 states. The adsorption process is one of the available methods to remove Arsenic from aqueous solutions. Thus, this papers aims at removing Arsenic (III) from aqueous solutions through adsorption on iron oxide granules. The relation among four inde...
متن کاملModeling and Optimization of Arsenic (III) Removal from Aqueous Solutions by GFO Using Response Surface Methodology
Arsenic is a highly toxic element for human beings, which is generally found in groundwater. Dissolved Arsenic in water can be seen as As+3 and As+5 states. The adsorption process is one of the available methods to remove Arsenic from aqueous solutions. Thus, this papers aims at removing Arsenic (III) from aqueous solutions through adsorption on iron oxide granules. The relation among four inde...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Mechanical Engineering and Applications
سال: 2016
ISSN: 2330-023X
DOI: 10.11648/j.ijmea.20160402.18