Modeling and calculation of turbulent lifted diffusion flames
نویسندگان
چکیده
منابع مشابه
LES modeling for lifted turbulent jet flames
The LES method is an attractive approach for the simulation of turbulent jet flames. In this method, the effects of large scale structures controlling the mixing process are resolved while small-scale effects such as the leading-edge flames involved in the flame base dynamics are accounted for by the subgrid-scale models. The LES approach is examined in this study with a particular emphasis on ...
متن کاملUnsteady Flamelet Modeling of Turbulent Hydrogen-air Diffusion Flames
The unsteady flamelet model is applied in numerical simulations of a steady, turbulent, nitrogen-diluted hydrogen-air diffusion flame. An unsteady flamelet is solved interactively with a CFD solver for the turbulent flow and the mixture fraction field. Transient effects occurring in steady jet diffusion flames are discussed in terms of the relevant timescales. It is shown that radiation can be ...
متن کاملModeling soot formation in turbulent kerosene/air jet diffusion flames
Soot volume fraction and number density in a turbulent diffusion flame burning kerosene/air were predicted using two approaches. The first used a conventional soot inception model based on the acetylene concentration and is referred to as the acetylene model. The second used a soot inception model based on the formation rate of three and two ring aromatics [1] and is referred to as the PAH ince...
متن کاملUnsteady Flamelet Modeling of Differential Diffusion in Turbulent Jet Diffusion Flames
An unsteady flamelet model, which will be called the Lagrangian Flamelet Model, has been applied to a steady, turbulent CH4/H2/N2–air diffusion flame. The results have been shown to be in reasonable agreement with experimental data for axial velocity, mixture fraction, species mass fractions, and temperature. The application of three different chemical mechanisms leads to the promising conclusi...
متن کاملRadiation modeling of a turbulent diffusion flame in diesel engine
The purpose of this study is to investigate the effect of radiation heat transfer on temperature distribution and heat flux to the walls of a diesel engine. A diffusion flame is modeled in a simple cylindrical geometry and boundary conditions are defined. A specific solver which can model the turbulent diffusion flame by considering radiation in participating media is used to solve the problem....
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Combustion and Flame
سال: 1994
ISSN: 0010-2180
DOI: 10.1016/0010-2180(94)90155-4