Modeling, Analysis, and Experimental Validation of Frequency Dividers with Direct Injection
نویسندگان
چکیده
منابع مشابه
CMOS Direct-Injection Divide-by-3 Injection-Locked Frequency Dividers
This paper proposes CMOS LC-tank divide-by-3 injection locked frequency dividers (ILFDs) fabricated in 0.18 μm and 90nm CMOS process and describes the circuit design, operation principle and measurement results of the ILFDs. The ILFDs use two injection series-MOSFETs across the LC resonator and a differential injection signal is applied to the gates of injection MOSFETs. The direct-injection di...
متن کاملSuperharmonic Injection-Locked Frequency Dividers
Injection-locked oscillators (ILO’s) are investigated in a new theoretical approach. A first-order differential equation is derived for the noise dynamics of ILO’s. A single-ended injection-locked frequency divider (SILFD) is designed in a 0.5m CMOS technology operating at 1.8 GHz with more than 190 MHz locking range while consuming 3 mW of power. A differential injection-locked frequency divid...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Superharmonic Injection Locked Oscillators as Low Power Frequency Dividers
Superharmonic injection locking is investigated in a new theoretical approach. Low power frequency dividers are designed using injection locked oscillators with cascode transistors. The Rockwell 0:5 m CMOS process is used to design a 3mW injection locked frequency divider in the 1800MHz frequency range. A 200MHz maximum locking range is achieved in simulations. 2SC3302 TOSHIBA NPN transistors a...
متن کاملA Unified Model for Injection-Locked Frequency Dividers
Injection-locked frequency dividers (ILFDs) are versatile analog circuit blocks used, for example, within phase-locked loops (PLLs). An important attribute is substantially lower power consumption relative to their digital counterparts. The model described in this paper unifies the treatment of injection-locked and regenerative systems. It also provides useful design insights by clarifying the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Electrical and Computer Engineering
سال: 2013
ISSN: 2090-0147,2090-0155
DOI: 10.1155/2013/365692