Model Uncertainty in Accelerated Degradation Testing Analysis
نویسندگان
چکیده
منابع مشابه
Quantitative accelerated degradation testing: Practical approaches
The concept of accelerated testing by tracking degradation of samples over test time needs to be developed for reliability estimation. This paper aims at proposing practical approaches to conduct accelerated degradation testing on new and available used samples. For this purpose, product failure is related to a suitable physical property. Then, its failure time is defined as the expected time i...
متن کاملAccelerated Stress Testing and Diagnostic Analysis of Degradation in CdTe Solar Cells
Solar cell module reliability is inextricably linked to cell-level reliability. This is particularly so with thin-film technologies. In CdTe, reliability issues historically associate with back contact stability and the use of Cu as an extrinsic dopant. Using a simple approach by which identical cells are heated under open-circuit bias and 1-sun illumination, degradation activation energies of ...
متن کاملRoughness uncertainty analysis in river flooding using HEC-RAS model
Although flood maps based on the deterministic approach play an important role in minimizing flood losses, there is considerable uncertainty in calculating the level of water inundation. Roughness is a key parameter in water surface elevation. Since roughness is not easily measurable and is estimated based on experimental and laboratory methods, it introduces a significant degree of uncertainty...
متن کاملA Bayesian Optimal Design for Sequential Accelerated Degradation Testing
When optimizing an accelerated degradation testing (ADT) plan, the initial values of unknown model parameters must be pre-specified. However, it is usually difficult to obtain the exact values, since many uncertainties are embedded in these parameters. Bayesian ADT optimal design was presented to address this problem by using prior distributions to capture these uncertainties. Nevertheless, whe...
متن کاملAccelerated Degradation Tests: Modeling and Analysis
High reliability systems generally require individual system components having extremely high reliability over long periods of time. Short product development times require reliability tests to be conducted with severe time constraints. Frequently few or no failures occur during such tests, even with acceleration. Thus, it is difficult to assess reliability with traditional life tests that reco...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Transactions on Reliability
سال: 2017
ISSN: 0018-9529,1558-1721
DOI: 10.1109/tr.2017.2696341