Model test with sensor equipped Francis runner for Part Load Operation
نویسندگان
چکیده
منابع مشابه
Optimization of GAMM Francis Turbine Runner
Nowadays, the challenge in hydraulic turbine design is the multi-objective design of turbine runner to reach higher efficiency. The hydraulic performance of a turbine is strictly depends on runner blades shape. The present paper focuses on the application of the multi-objective optimization algorithm to the design of a small Francis turbine runner. The optimization exercise focuses on the effic...
متن کاملPrediction of Francis Turbine Prototype Part Load Pressure and Output Power Fluctuations with Hydroelectric Model
The prediction of pressure and output power fluctuations amplitudes on Francis turbine prototype is a challenge for hydro-equipment industry since it is subjected to guarantees to ensure smooth and reliable operation of the hydro units. The European FP7 research project Hyperbole aims to setup a methodology to transpose the pressure fluctuations induced by the cavitation vortex rope from the re...
متن کاملModelling of the Francis turbine runner in power stations. Part II: stress analysis
The second part of this paper presents results of stress analysis of the whole Francis turbine runner at Derbendikan power station by using the Finite Element Method (FEM). Computations were carried out with appropriate boundary and loading conditions for water pressure obtained from CFD analysis. The analysis focuses on stress distribution in the runner blades. It has been found that the maxim...
متن کاملDetection and analysis of part load and full load instabilities in a real Francis turbine prototype
Francis turbines operate in many cases out of its best efficiency point, in order to regulate their output power according to the instantaneous energy demand of the grid. Therefore, it is of paramount importance to analyse and determine the unstable operating points for these kind of units. In the framework of the HYPERBOLE project (FP7-ENERGY-2013-1; Project number 608532) a large Francis unit...
متن کاملPlunging Airfoil Load Characteristics Equipped with Gurney Flap
Numerous experiments have been conducted on plunging Eppler 361 airfoil in a subsonic wind tunnel. The experimental tests involved measuring the surface pressure distribution over the airfoil at Re=1.5×105. The airfoil was equipped with Gurney flap(heights of 2.6, 3.3 and 5% chord) and plunged at 6cm amplitude. The unsteady aerodynamic loads were calculated from the surface pressure measurement...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Earth and Environmental Science
سال: 2021
ISSN: 1755-1307,1755-1315
DOI: 10.1088/1755-1315/774/1/012118