Model predictive control for combined cycles integrated with CO2 capture plants
نویسندگان
چکیده
منابع مشابه
CO2 Capture from Natural Gas Combined Cycles
CO2 capture from fossil fuel power plants is increasingly proposed for greenhouse gases emission mitigation. It can be applied to coal power stations (with boiler and steam cycle or with gasification) or to natural gas combined cycles (NGCC). The first case is probably the most important in a mid-term perspective, due to: (i) the larger amount of avoided carbon per unit of electricity produced,...
متن کاملNonlinear Model Predictive Control for Combined Cycle Power Plants
This master thesis project serves to investigate the possibilities of Nonlinear Model Predictive Control (NMPC) using the example of enthalpy control of the BENSON HRSG (heat recovery steam generator) of a combined cycle power plant (CCPP). The general idea of NMPC is to solve an optimization problem, to find the next control action, and this optimization problem is based on a model of the syst...
متن کاملNonlinear Model Predictive Control of Combined Cycle Power Plants
The recent widespread diffusion of Combined Cycle Power Plants (CCPPs) is due to crucial technological advantages with respect to oil or coal fired plants. Among them, CCPPs guarantee higher efficiency and lower emissions. However, in the context of a deregulated energy market, better performances of the CCPPs control schemes are required during load transitions to allow for their use in grid f...
متن کاملMulti-model approaches for Integrated Design of Wastewater Treatment Plants with Model Predictive Control
In this work some multi-model and norm based approaches for Integrated Design of processes and constrained Model Predictive Control systems have been proposed. The Integrated Design procedure provides simultaneously the plant dimensions and working point together with the parameters of the control system by solving a multi-objective constrained non-linear optimization problem. Particularly, the...
متن کاملTwo novel oxy-fuel power cycles integrated with natural gas reforming and CO2 capture
Two novel system configurations were proposed for oxy-fuel natural gas turbine systems with integrated steam reforming and CO2 capture and separation. The steam reforming heat is obtained from the available turbine exhaust heat, and the produced syngas is used as fuel with oxygen as the oxidizer. Internal combustion is used, which allows a very high heat input temperature. Moreover, the turbine...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Computers & Chemical Engineering
سال: 2021
ISSN: 0098-1354
DOI: 10.1016/j.compchemeng.2020.107217