Model-based predictive direct power control of brushless doubly fed reluctance generator for wind power applications
نویسندگان
چکیده
منابع مشابه
Power Decoupling Control of Open-Winding Brushless Doubly- Fed Reluctance Machine for Wind Power Generator Application
A novel open-winding brushless doubly-fed reluctance machine and its power decoupling control system are proposed for wind power generator application. The control winding of brushless doubly-fed reluctance generator (BDFRG) is designed as openwinding structure, and the double-end power supply cascade two-level inverter is adopted to excite the open-winding BDFRG. This topology structure has be...
متن کاملIntroduction to Doubly-Fed Induction Generator for Wind Power Applications
This chapter introduces the operation and control of a Doubly-fed Induction Generator (DFIG) system. The DFIG is currently the system of choice for multi-MW wind turbines. The aerodynamic system must be capable of operating over a wide wind speed range in order to achieve optimum aerodynamic efficiency by tracking the optimum tip-speed ratio. Therefore, the generator’s rotor must be able to ope...
متن کاملSwitched Reluctance Generator for Wind Power Applications
Green house effect has becomes a serious concern in many countries due to the increase consumption of the fossil fuel. There have been many studies to find an alternative power source. Wind energy found to be one of the most useful solutions to help in overcoming the air pollution and global. There is no agreed solution to conversion of wind energy to electrical energy. In this paper, the advan...
متن کاملSliding-Mode-based Improved Direct Active and Reactive Power Control of Doubly Fed Induction Generator under Unbalanced Grid Voltage Condition
This paper proposes an improved direct active and reactive power control (DPC) strategy for a grid-connected doubly fed induction generator (DFIG) based wind-turbine system under unbalanced grid voltage condition. The method produces required rotor voltage references based on the sliding mode control (SMC) approach in stationary reference frame, without the requirement of synchronous coordinate...
متن کاملDoubly-fed Induction Generator Drives for Wind Power Plants
This chapter presents the theoretical basics of the electric power generation using doublyfed induction drives in wind turbines. This type of drive is the most utilized in wind power plants nowadays. This is mainly due to its fast dynamic response and reduced power electronics on the rotor side. This latter aspect is responsible for less harmonic pollution in the network and reduced acquisition...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Alexandria Engineering Journal
سال: 2016
ISSN: 1110-0168
DOI: 10.1016/j.aej.2016.08.004