Model Based Predictive Control Using Neural Network for Bioreactor Process Control
نویسندگان
چکیده
منابع مشابه
Model Based Predictive Control Using Neural Network for Bioreactor Process Control
This paper deals with a neural network based GPC structure for a bioprocess control. Comparing to IMC structure, this method offers two advantages: the neural inverting operation of the process model is eliminated and there are various possibilities to adjust the control law properties. The GPC method is applied to a biomass production process and to an enzymatic production process (lipase prod...
متن کاملNeural Network Based Model Predictive Control
Greg Martin Pavilion Technologies Austin, TX 78758 [email protected] Mark Gerules Pavilion Technologies Austin, TX 78758 [email protected] Model Predictive Control (MPC), a control algorithm which uses an optimizer to solve for the optimal control moves over a future time horizon based upon a model of the process, has become a standard control technique in the process industries over the past two ...
متن کاملImproved Optimization Process for Nonlinear Model Predictive Control of PMSM
Model-based predictive control (MPC) is one of the most efficient techniques that is widely used in industrial applications. In such controllers, increasing the prediction horizon results in better selection of the optimal control signal sequence. On the other hand, increasing the prediction horizon increase the computational time of the optimization process which make it impossible to be imple...
متن کاملNeural Network Model Predictive Control of Non- Linear Biopolymerization Process
This paper focuses on the developing a mechanistic model of the biopolymerization process and linking with the feedforward neural network model to obtain a hybrid model of lipase-catalyzed ring-opening polymerization of ε-caprolactone (ε-CL) for Poly (ε-caprolactone) PCL production using feed forward neural networks and control using model predictive control. Model predictive control (MPC) has ...
متن کاملUsing Neural Network to Control STATCOM for ImprovingTransient Stability
FACTS technology has considerable applications in power systems, such as; improving the steady stateperformance, damping the power system oscillations, controlling the power flow, and etc. STATCOM is oneof the most important FACTS devices used in the parallel compensation, enhancing transient stability andetc. Since three phase fault is widespread in power systems, in this paper STATCOM is used...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IFAC Proceedings Volumes
سال: 2001
ISSN: 1474-6670
DOI: 10.1016/s1474-6670(17)34242-8