Model-Based Cost Optimization of Double-Effect Water-Lithium Bromide Absorption Refrigeration Systems
نویسندگان
چکیده
منابع مشابه
Mathematical Model of a Lithium-Bromide/Water Absorption Refrigeration System Equipped with an Adiabatic Absorber
The objective of this paper is to develop a mathematical model for thermodynamic analysis of an absorption refrigeration system equipped with an adiabatic absorber using a lithium-bromide/water (LiBr/water) pair as the working fluid. The working temperature of the generator, adiabatic absorber, condenser, evaporator, the cooling capacity of the system, and the ratio of the solution mass flow ra...
متن کاملMulti-objective Optimization of Sustainable Single-Effect Water/Lithium Bromide Absorption Cycle
A rigorous mathematical approach is developed for optimization of sustainable single-effect water/Lithium Bromide (LiBr) absorption cooling cycles. The multi-objective formulation accounts for minimization of the chiller area as well as the environmental impact associated with the operation of the absorption cycle. The environmental impact is quantified based on the global warming potential and...
متن کاملAnalysis on Hollow Fiber Membrane Heat Exchanger Applying to the Lithium Bromide Absorption Refrigeration System
The aim of this work is to bring forward a new style heat exchanger about hollow fiber membrane module, and to analyze the performance which can expectantly be applied in the lithium bromide absorption refrigeration system. Polyvinylidene fluoride hollow fiber membrane module was adopted as the new style solution heat exchanger, hot feed solution from the generator flowed into the lumen side of...
متن کاملComparison and Analysis of Lithium Bromide-water Absorption Chillers Using Plastic Heat Transfer Tubes and Traditional Lithium Bromide-water Absorption Chillers
There are extensive applications of lithium bromide-water absorption chillers in industry, but the heat exchangers corrosion and refrigerating capacity loss are very difficult to be solved. In this paper, an experiment was conducted by using plastic heat transfer tubes instead of copper tubes. As an example, for a lithium bromide-water absorption chiller of refrigerating capacity of 35kW, the c...
متن کاملModel Based Control of Refrigeration Systems
Thybo has supervised the work. I would especially like to express my gratitude to my good friend, dive mate, college and supervisor Claus Thybo, for his invaluable help, support and inspiration. His guidance and support has truly been ideal. Without his presence this project would not have been at all and it wouldn't have been so enjoyable. I would like to thank Jakob Stoustrup for sharing of h...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Processes
سال: 2019
ISSN: 2227-9717
DOI: 10.3390/pr7010050