Model-based control system for advanced diesel combustion
نویسندگان
چکیده
منابع مشابه
A dynamic PCCI combustion model for Diesel engine control design
Subject of this work is a dynamic simulation model for PCCI combustion that can be used in closed-loop control development. A detailed multi-zone chemistry model for the high-pressure part of the engine cycle is extended by a mean value model accounting for the gas exchange losses. The resulting model is capable of describing PCCI combustion with stationary exactness. It is at the same time ver...
متن کاملCylinder Pressure-Based Control of Pre-Mixed Diesel Combustion
Implementation of real-time combustion feedback for use in closed-loop combustion control is a technology that has potential to assist in the successful production implementation of advanced diesel combustion modes. Low-temperature, pre-mixed diesel combustion is presently of interest because it offers the ability to lower the engine-out emissions of oxides of nitrogen (NOx) and particulate mat...
متن کاملActive Combustion Control of Diesel HCCI Engine: Combustion Timing
We propose a model based control strategy to adapt the injection settings according to the air path dynamics on a Diesel HCCI engine. This approach complements existing airpath and fuelpath controllers, and aims at accurately controlling the start of combustion. For that purpose, start of injection is adjusted based on a Knock Integral Model and intake manifold conditions. Experimental results ...
متن کاملFundamentals of Thermodynamic for Pressure-Based Low-Temperature Premixed Diesel Combustion Control
This thesis shows the results of investigations about the combustion mechanisms of low-temperature premixed processes, in particular those in which only a partial homogenization of the fuel mixture is achieved, since they represent a realistic solution for commercial engine applications. Measurements has been carried out on a modern 6-cylinder diesel engine equipped with a rapid-prototyping ECU...
متن کاملفرآیند کنترل در سیستم کامپیوتری تهویه مطبوع airwasher environmental control system for intelligent buildings
در این پایان نامه با استفاده از تکنولوژی روز و امکانات داخل کشور طریقه اتوماسیون سیستم تاسیساتی یک کارخانه نساجی (کارخانه نساجی اطلس پود) همراه با منوهای مربوطه و توضیحات کامل برنامه نویسی و طراحی بلوک های برنامه و سایر قسمتهای برنامه ارائه گشته است. علاوه بر این، برنامه با نمونه آمریکایی آن مقایسه و مزیت های آن نسبت به آمریکایی توضیح داده شده است. همچنین تمامی بلوک های برنامه بصورت شماتیکی بطو...
15 صفحه اولذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IFAC-PapersOnLine
سال: 2019
ISSN: 2405-8963
DOI: 10.1016/j.ifacol.2019.09.028