Mode I-II Combined Mode Fracture Criterion for Brittle Materials
نویسندگان
چکیده
منابع مشابه
Dynamic fracture initiation in brittle materials under combined mode I/II loading
A new test method has been developed to measure the resistance of dynamic fracture initiation in brittle materials under combined mode I/I loadings. The Brazilian disks with center-cracks have been fractured under oblique impact loadings in diarnetral-compression. The dynamic stress intensity factors of mode I and H are evaluated from the superposition integrals of the step response functions f...
متن کاملEeect of Boundary Conditions in Mode I Fracture in Brittle Materials
We present results on the eeect of geometrical boundary conditions on the stress distribution at the tip of cracks in mode I fracture. We have made molecular dynamics simulations on a 2-D triangular lattice of point masses connected by brittle Hookean springs. We study the connguration of the stress eld in rectangular shape lattices of diierent aspect ratios and with initial notches of varying ...
متن کاملEffect of Rock Fracture Filling on Mode I and II Fracture Toughness
This paper focuses on some fracture toughness tests performed on the pre-cracked Brazilian specimens of rock-like materials. Also the effect of rock fracture filling on the fracture toughness was considered experimentally. Fracture toughness is a key parameter for studying the crack propagation and fragmentation processes in rock structures. Fracture mechanics is an applicable tool to improve ...
متن کاملA failure criterion for brittle elastic materials under mixed-mode loading
The failure criterion of Leguillon at reentrant corners in brittle elastic materials (Leguillon 2002, Eur J Mech A/Solids 21: 61–72; Leguillon et al. (2003), Eur J Mech A—Solids 22(4): 509–524) validated in (Yosibash et al. 2004, Int J Fract 125(3–4): 307–333) for mode I loading is being extended to mixed mode loading and is being validated by experimental observations. We present an explicit d...
متن کاملFinite Element Modeling of Crack Initiation Angle Under Mixed Mode (I/II) Fracture
Present study deals with the prediction of crack initiation angle for mixed mode (I/II) fracture using finite element techniques and J-Integral based approach. The FE code ANSYS is used to estimate the stress intensity factor numerically. The estimated values of SIF were incorporated into six different crack initiation angle criteria to predict the crack initiation angle. Single edge crack spec...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1998
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.62.8_735