Modal interactions of flexural and torsional vibrations in a microcantilever
نویسندگان
چکیده
منابع مشابه
Dynamic Modeling and Control of Integrated Micro- and Nano- systems: A.1. Coupled Flexural-Torsional Nonlinear Vibrations of PZT-actuated Microcantilevers: The problem of coupled flexural-torsional nonlinear vibrations of a piezoelectrically-actuated microcantilever beam as a typical configuration utilized in microcantilever-based sensing
The problem of coupled flexural-torsional nonlinear vibrations of a piezoelectrically-actuated microcantilever beam as a typical configuration utilized in microcantilever-based sensing is being investigated. The actuation and sensing are both facilitated through bonding a piezoelectric layer (here, ZnO) on the microcantilever surface. Considering different geometrical configurations for the bea...
متن کاملTorsional Vibrations of Nonhomogeneous
ABSTRACT. This paper is concerned with the torsional vibrations of a nonhomogeneous magnetostrictive elastic cylinder. The cylinder is subjected to the action of a circumferential magnetic field produced by an axial current of constant density and the deformation of a magnetostrictive cylinder is produced by a constant longitudinal magnetic field. The frequency equation is determined, and the d...
متن کاملA Novel Slope Method for Measurement of Fluid Density with a Micro-cantilever under Flexural and Torsional Vibrations
A novel method, which was called a slope method, has been proposed to measure fluid density by the micro-cantilever sensing chip. The theoretical formulas of the slope method were discussed and established when the micro-cantilever sensing chip was under flexural and torsional vibrations. The slope was calculated based on the fitted curve between the excitation and output voltages of sensing ch...
متن کاملGeneralized Warping In Flexural-Torsional Buckling Analysis of Composite Beams
The finite element method is employed for the flexural-torsional linear buckling analysis of beams of arbitrarily shaped composite cross-section taking into account generalized warping (shear lag effects due to both flexure and torsion). The contacting materials, that constitute the composite cross section, may include a finite number of holes. A compressive axial load is applied to the beam. The...
متن کاملLongitudinal-Torsional and Two Plane Transverse Vibrations of a Composite Timoshenko Rotor
In this paper, two kinds of vibrations are considered for a composite Timoshenko rotor: longitudinal-torsional vibration and two plane transverse one. The kinetic and potential energies and virtual work due to the gyroscopic effects are calculated and the set of six governing equations and boundary conditions are derived using Hamilton principle. Differential quadrature method (DQM) is used as ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Ultramicroscopy
سال: 2012
ISSN: 0304-3991
DOI: 10.1016/j.ultramic.2012.06.010