MIXING ENHANCEMENT IN ELECTROOSMOTIC MICROMIXERS
نویسندگان
چکیده
Micromixers have important applications in various pharmaceutical and medical fields. In the present study, enhancement of mixing index electroosmotic micromixer with different geometries is investigated. The commercial software COMSOL Multiphysics 5.4 employed to solve mathematical models. SIMPLEC
 algorithm for coupling velocity pressure A second-order upwind scheme used reduce artificial diffusivity. results show a remarkable effect electric field on efficiency. optimum geometry one no obstacle chamber. For geometry, it demonstrated that efficiency increases voltage, however there are values frequency inlet which exhibits its best performance. 8 Hz 0.1 mm/s, respectively. It revealed can reach about 97%.
منابع مشابه
Longitudinal Vortices Mixing in Three-Stream Micromixers with Two Inlets
In this work, we examine fluid mixing in a full three-stream mixing channel with longitudinal vortex generators (LVGs) built on the channel bottom by numerical simulation and experiment. The effects of the asymmetrical arrangement and the attack angle of the LVGs on fluid mixing are investigated. The results show that the micromixer with LVGs at a small asymmetry index (defined by the ratio of ...
متن کاملMixing Behaviors of Shear-Thinning Fluids in Serpentine-Channel Micromixers
This study aims to investigate the mixing behaviors of deionized (DI) water and carboxymethyl cellulose (CMC) solutions in C-shaped serpentine micromixers over a wide range of flow conditions. The flow of CMC solutions exhibits shear-thinning behaviors. Numerical simulations are performed to investigate the effects of the mean flow speed, fluid properties and geometry parameters on flow and mix...
متن کاملGeometric effects on fluid mixing in passive grooved micromixers.
The effects of geometric parameters on the mixing performance of a staggered herringbone mixer (SHM) with patterned grooves are numerically investigated. Combining use of the software package CFD-ACE+ and the Taguchi method provides a powerful and systematic approach for research on microfluidics. An orthogonal array L9(3(4)) is established for parameters introduced by the groove geometry; in t...
متن کامل-Implementation of lattice Boltzmann method to study mixing reduction in isothermal electroosmotic pump with hydrophobic walls
The aim of the present work is to analyze the accuracy and to extend the capability of lattice Boltzmann method in slip EOF; a phenomenon which was previously studied by molecular dynamics and less considered by LBM. At the present work, a numerical experiment on boundary conditions of slip velocity is performed and the proportionality of slip with shear stress in electroosmotic pump is proved....
متن کاملInvestigation of electrokinetic mixing in 3D non-homogenous microchannels
A numerical study of 3D electrokinetic flows through micromixers was performed. The micromixers considered here consisted of heterogeneous rectangular microchannels with prescribed patterns of zeta-potential at their walls. Numerical simulation of electroosmotic flows within heterogeneous channels requires solution of the Navier-Stokes, Ernest-Plank and species concentration equations. It is kn...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Thermal Engineering
سال: 2021
ISSN: ['2148-7847']
DOI: https://doi.org/10.18186/thermal.867134