Mixed-mode fracture (K<sub>I</sub> and K<sub>II</sub>) evaluation in epoxy resin using ASENB configuration

Mixed Mode Fracture Analysis of Multiple Interface Cracks

This paper contains a theoretical formulation of multiple interface cracks in two bonded dissimilar half planes subjected to in-plane traction. The distributed dislocation technique is used to construct integral equations for a dissimilar mediums weakened by several interface cracks. These equations are of Cauchy singular type at the location of dislocation, which are solved numerically to obta...

Investigating mixed-mode (I/II) fracture in epoxies using digital image correlation: Composite GIIc performance from resin measurements

The digital image correlation technique is applied to investigate mixed-mode (I/II) fracture in five aerospace epoxy formulations, four of which are experimentally toughened. Stress intensity factors are extracted from displacement fields using the Williams method for a range of mode mixities. From these measurements, values of an effective resin KIIc are deduced and these are shown to have a s...

Characterization of Epoxy Resin (SU-8) Film Using Thickness-Shear Mode (TSM) Resonator under Various Conditions

Mixed-mode fracture of human cortical bone.

Although the mode I (tensile opening) fracture toughness has been the focus of most fracture mechanics studies of human cortical bone, bones in vivo are invariably loaded multiaxially. Consequently, an understanding of mixed-mode fracture is necessary to determine whether a mode I fracture toughness test provides the appropriate information to accurately quantify fracture risk. In this study, w...

Mixed Mode Fracture in Reinforced Concrete with Low Volume Fraction of Steel Fibers

An investigation into the mixed mode fracture of steel fiber reinforced concrete (SFRC)beams with one percent volume fraction of steel fiber is presented. A series of notched beams withdifferent notch depths and locations are tested under three-point bending. The test results for apparentfracture toughness, crack trajectories, and fracture energy are presented. The crack paths for SFRCand plain...