Mitigation of Turbine Vane Shock Waves Through Trailing Edge Cooling

Simulating Cooling Injection Effect of Trailing Edge of Gas Turbine Blade on Surface Mach Number Distribution of Blade

In this research, a gas turbine blade cascade was investigated. Flow analysis around the blade was conducted using RSM and RNG.K-ε turbulence modeling and it is simulated by Fluent software. The results were considered for the cases as Mach number loss at the trailing edge of blade caused by vortexes that were generated at the end of blade. Effect of cooling flow through the trailing edge on th...

An experimental investigation on the trailing edge cooling of turbine blades

ational Laborator 016/j.jppr.2012.10 thor. [email protected] r responsibility o ronautics, China. Abstract An experimental study was conducted to quantify the flow characteristics of the wall jets pertinent to trailing edge cooling of turbine blades. A high-resolution stereoscopic particle image velocimetry (PIV) system was used to conduct detailed flow field measurements to quantitatively visua...

Aerodynamic Analysis of Trailing Edge Enlarged Wind Turbine Airfoils

Study of Trailing-Edge Cooling Using Pressure Sensitive Paint Technique

An experimental investigation was conducted to study the effects of blowing ratio and the existence of lands on the film cooling effectiveness of a turbine blade trailing-edge model. Instead of using a temperature-based technique, a mass transfer analogywas used to quantify the film cooling effectiveness. This was done through themeasurement of the distribution of oxygen concentration over the ...

Flow and Thermal Performance of a Gas Turbine Nozzle Guide Vane with a Leading Edge Fillet

Complex three-dimensional vortex flows develop at the junction of a gas turbine airfoil and its casing (endwall). These flows increase the transfer of heat from the combustion gases to the metal parts and contribute to reduced aerodynamic efficiency. Past studies have shown that the use of a large fillet at the airfoil-endwall junction can reduce or eliminate the endwall vortex flow pattern. To...