Mirror Surface Finishing Properties of Plastic Mold Steels
نویسندگان
چکیده
منابع مشابه
Effect of Zr Addition on Mechanical Properties of Cr-Mo Plastic Mold Steels
We investigated the effects of the additions of Zr and other alloying elements on the mechanical properties and microstructure in Cr-Mo plastic mold steels. The addition of alloying elements changed the microstructure of the normalized samples from the upper bainite to lower bainite due to the increased hardenability. The tempering temperature influenced the strength and hardness values, especi...
متن کاملEffect of chitosan on the mold resistance of wood and its surface properties
In this study, the effect of soluble chitosan, thyme oil and linseed oil on the mold resistance of wood and its surface properties was investigated. Both low and medium molecular weight chitosan with concentration of 1 and 2% were used. Cypress wood samples with dimensions of 20 × 20 × 70 mm and moisture content of 12% were saturated by the preservatives. The results showed that the maximum abs...
متن کاملToolpath Strategy and Optimum Combination of Machining Parameter during Pocket Mill Process of Plastic Mold Steels Material
Plastic based products spread all over the world in many aspects of life. The ability to substitute other materials is getting stronger and wider. The use of plastic materials increases and become unavoidable. Plastic based mass production requires injection process as well Mold. The milling process of plastic mold steel material was done using HSS End Mill cutting tool that is widely used in a...
متن کاملInfluence of Surface Finishing on Fatigue Properties of Valve Steel
The fatigue strength of flapper valves depends among other things on surface properties of the steel. This paper deals with the effect of a tumbling method*) on bending and tensile fatigue properties of test bars. For carbon steel SANDVIK 20C an improvement was observed in several test series, particularly in the transverse direction of the strip, whereas there was little effect for stainless s...
متن کاملMirror Surface Finishing of Hardened Die Steel by High-power Ultrasonic Elliptical Vibration Cutting
Ultrasonic elliptical vibration cutting has recently been utilized in industry for finishing of various precision parts such as mirror surface finishing and precision micro machining of dies and molds. However, its application has been limited to high-cost ultra-precision machining, where depth of cut is typically in a range from a few micrometers to several tens of micrometers due to power lim...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: DENKI-SEIKO[ELECTRIC FURNACE STEEL]
سال: 2003
ISSN: 0011-8389
DOI: 10.4262/denkiseiko.74.125