Mirror Finishing with Electro-Abrasive Polishing Process
نویسندگان
چکیده
منابع مشابه
Abrasive Jet Polishing and its Applications in Surface Finishing
Problem statement: Single Point Diamond Turning (SPDT) is highly deterministic and versatile in producing various forms of precise optics. A typical example is the production of large offaxis aspheric mirrors and various infrared mirrors and mandrels. However, the fine periodical turning marks left in the surface critically limit its performance and they are difficult to be avoided for traditio...
متن کاملOptimization of process parameter for surface finishing in abrasive flow finishing process
274 Optimization of process parameter for surface finishing in abrasive flow finishing process Ravi Gupta (M.E) Asst. Prof.(Lovely Professional University) [email protected] , Abstract-Abrasive flow finishing is a non-conventional finishing process that is used for finishing of work piece which are difficult to finish by conventional method i.e. by honing, lapping and other machining operati...
متن کاملModeling of Polishing Mechanism in Magnetic Abrasive Polishing
Magnetic Abrasive Polishing (MAP) is a super-finishing process primarily used for polishing of nonmagnetic and hard materials like, ceramics and stainless steel. This paper deals with the detailed parametric study in polishing of stainless steel work surface. Statistically designed experiments based on Taguchi methods show that size-ratio, tool-work surface clearance, polishing speed, magnetic ...
متن کاملMeasurement and simulation of magnetic field strenght in the nano magnetic abrasive finishing process
Magnetic abrasive finishing can be classified as a non-traditional super finishing method for finishing surfaces with different shapes and working materials like flat plates, shafts, bearings parts, screws, tubes and many other mechanical parts that need good surface finishing properties. MAF is effective in polishing, cleaning, deburring and burnishing metal parts. The most important parameter...
متن کاملAbrasive Flow Polishing of Micro Bores
This report shares the feasibility study results of abrasive flow polishing of microbores of size φ500 μm or smaller and 25∼50 in aspect ratio for both metal and ceramic materials. A polishing device was designed and built up so as to create enough turbulence for facilitating the polishing at the inner walls of the micro-bore. Polishing of micro-bores on 3 materials: S45C, SS304 and Zr2O3 of le...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: CORROSION ENGINEERING
سال: 1989
ISSN: 0010-9355,1884-1155
DOI: 10.3323/jcorr1974.38.2_126