Minimum spouting velocity and peak pressure drop in spouted beds.

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Study of Pressure Drop in the 2D Spouted Bed with Conical Base of Binary Particle Mixtures: Effects of Particle Size and Density

In this study, the pressure drop for the binary mixtures of particles differing in size and density in a pseudo-2D spouted bed was experimentally studied. A binary mixture of solid particles including sand, Gypsum, and polyurethane was used in the experimental setup. Effects of static bed height, cone angle, particles diameter, and a particles weight fraction on the bed pressure drop were e...

متن کامل

Spouting Enhancement by Addition of Small Quantities of Liquid to Large-Particle Gas-Spouted Beds

Mechanical Engineering, Kochi National College of Technology, 200-1, Monobe, Nankoku-shi, Kochi, JAPAN, 783-8508 Fax: +81-88-864-5521, E-mail: [email protected] 1 Chemical and Biological Engineering, University of British Columbia, 2216 Main Mall, Vancouver, BC, CANADA, V6T1Z4, E-mail:[email protected] 2 Mechanical Engineering, Tokyo Metropolitan University, 1-1, Minami Osawa, Hachioji-sh...

متن کامل

Applicability of the spouting regime for drying of biomass wastes in conical spouted beds with a draft tube

The operating conditions in spouted bed regime of uniform beds consisting of different biomass wastes dry and wet have been studied to determine the applicability of conical spouted beds with a draft tube in the drying of biomass wastes. This experimental study has been carried out at room temperature and the effect of the solid humidity on the stability of beds of biomass wastes has been deter...

متن کامل

Prediction of Minimum Spout Velocity and Moisture Distribution of Ammonium Perchlorate Particles in a Spouted Bed Dryer

Ammonium perchlorate particles have been dried in a laboratory spouted bed dryer (screen-bottomed type) which is categorized as a fluidized bed dryer. The solid particles obtained in this process of drying were semi-porous and known as the group D of Geldart classification. The variations of moisture content with resident time, the effects of bed height on the pressure dro...

متن کامل

Pressure Drop in Liquid-Solid Circulating Fluidized Beds

An experiment was conducted to obtain data of pressure drop in riser tubes of liquid-solid circulating fluidized beds. In the experiment, 2 kinds of riser tube having a diameter of 24mm and 36mm were used. Tested particles were of glass and ceramics, and their diameter range was from 2.10 to 4.95mm. Water at ambient conditions was used as the fluidizing fluid. Pressure drop in riser tubes was m...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: KAGAKU KOGAKU RONBUNSHU

سال: 1990

ISSN: 0386-216X,1349-9203

DOI: 10.1252/kakoronbunshu.16.788