Minimization of Cogging Force in Flat Permanent Magnet Linear Motors
نویسندگان
چکیده
منابع مشابه
Minimization of Cogging Force in Fractional-Slot Permanent Magnet Linear Motors with Double-Layer Concentrated Windings
Abstract: Permanent magnet linear motors (PMLMs) with double-layer concentrated windings generally show significant cogging forces due to the introduction of auxiliary teeth for eliminating the end-effect induced phase unbalance, even when the fractional-slot technology is applied. This paper presents a novel approach to reduce the cogging force by adjusting the armature core dimensions in frac...
متن کاملState-Periodic Adaptive Compensation of Cogging and Coulomb Friction in Permanent Magnet Linear Motors
This paper focuses on the state-periodic adaptive compensation of cogging and Coulomb friction for permanent magnet linear motors (PMLM) executing a task repeatedly. The cogging force is considered as a position dependent disturbance and the considered Coulomb friction is non-Lipschitz at zero velocity. The key idea of our disturbance compensation method is to use one trajectory-period past inf...
متن کاملMinimization of Cogging Force in a Stationary Discontinuous Armature Linear Permanent Magnet Motor at the Outlet Edge
Generally, the discontinuous armature permanent magnet linear synchronous motor (PM-LSM) is composed by the stator block (accelerator, re-accelerator, and decelerator) and the free running section. However, the stationary discontinuous armature design involves the velocity variation of the mover during drive when the armature’s non-installation part changes over to installation part as a result...
متن کاملPermanent Magnet Linear Transverse Flux Motors
The transverse flux machines (TFM), introduced at the beginning of the 80’s, are possible solutions for diverse applications requiring special electrical machines [1]. The researches have focused until now mainly on rotary TFMs. A new type of permanent magnet linear transverse flux reluctance machine is proposed here. Such machines can be successfully applied for example in conveyor application...
متن کاملCogging Torque Minimization of Surface-Mounted Permanent Magnet Synchronous Machines Using Hybrid Magnet Shapes
This paper deals with the magnet pole shape design for the minimization of cogging torque in permanent magnet synchronous machines (PMSM). New shapes of permanent magnet are proposed. The magnet shape is modeled analytically by a set of stacked and well dimensioned layers relatively to the height and opening angle. The final shape of magnet is configured by using three models in view of obtaini...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEJ Transactions on Industry Applications
سال: 2005
ISSN: 0913-6339,1348-8163
DOI: 10.1541/ieejias.125.456