Mini Milling Cutter Measurement Based on Machine Vision
نویسندگان
چکیده
منابع مشابه
Research on Parts Measurement Method Based on Machine Vision
This paper has described the measurement method of the phone slot on the assembly line. The method is based on computer vision. After reducing the effect of noise through fast median method, the authors locate the target area. Thus the authors extract the target area. The authors have proposed an edge detection algorithm based on the improved canny operator. The authors also have put forward th...
متن کاملMachine Vision Based Lumber Grain Measurement
In this paper, measurement of wood grains is discussed. A number of image processing techniques are first applied to images of all four long surfaces of sawn lumber. This gives us the rates and directions of the visible grains, which enables us to estimate the actual thickness and 3D directions of wood fibers. These are very important indicators about the strength of the subject. In these exper...
متن کاملExperimental Study on Milling CFRP with Staggered PCD Cutter
Carbon fiber reinforced plastics (CFRP) have good physical properties, such as high specific strength and high specific modulus. However, cutting delamination, tearing and burr, etc. often occur in the machining process of CFRP, which results in the uncontrollability of machining surface quality and serious tool wear. In this paper, milling of CFRP with a staggered cutter was carried out, the c...
متن کاملOn-machine Measurement of Large-scale Workpiece Based on Machine Vision
On-machine measurement(OMM) based on machine vision has been hot research topic in recent years because coordinate measuring machine(CMM) measurement requires significant resources in operating time and cost. This paper aims to develop an OMM method with a manipulator and industry camera. First, an on-machine calibration method of industry camera based on image sequence is studied. A set of mon...
متن کاملModeling and Analysis for Five-Axis High Speed Milling Process Based on Cutter Optimal Kinematics Performance
The overall goal of the research is the integration of geometric and mechanistic models for cutting process simulation and feedrate optimization. Five-axis milling methods are used in industries such as aerospace, automotive and mold for free-form surface machining. In these process, surface quality and material removal rate are of very important. Conservative cutting parameters have been mostl...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Engineering
سال: 2011
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2011.08.336