Mineralogical Characteristics and Isothermal Oxidation Kinetics of Ironsand Pellets
نویسندگان
چکیده
منابع مشابه
Isothermal and non-isothermal torrefaction characteristics and kinetics of microalga Scenedesmus obliquus CNW-N.
Isothermal and non-isothermal torrefaction characteristics and kinetics of microalga Scenedesmus obliquus (S. obliquus) CNW-N are studied using thermogravimetric analysis. The pyrolysis of S. obliquus CNW-N with increasing temperature is characterized by four-stage decomposition. Depending on the torrefaction temperature, light, mild, and severe torrefaction from the weight loss and the maximum...
متن کاملMeasurement of Self-Heating of Biomass Pellets using Isothermal Calorimetry
This thesis presents experimental work performed to develop a sensitive screening test procedure for biomass pellets, using isothermal calorimetry for direct measurement of the heat production rate. This method can be used to directly compare the reactivity, that is how prone the fuel is to self-heating, of different batches of biomass pellets. The results could be used for safety assessment by...
متن کاملThe Gas Phase Oxidation of Acetaldehyde Reaction Mechanism and Kinetics
The mechanism of the low temperature oxidation of gaseous acetaldehyde was investigated in the temperature range of 1 50-400?°C. The minor, intermediate and major products were identified and measured quantitatively by sampling directly into the ionization chamber of an MS10-C2 mass spectrometer from the reactor. The formation of H2O, CO, CO2, HCOOH, H2, HCHO, CH3COOH and CH3OH as the major pro...
متن کاملNon-Isothermal Dehydration Kinetics of Diphasic Mullite Precursor Gel
Aluminosilicate gel precursor having mullite composition was synthesized from inorganic salts of aluminum and silicon by employing the sol-gel method. Chemical analysis, surface area and bulk density measurements were performed to characterize the dried gel. The course of the mullitization was examined by FT-IR analysis which confirmed the diphasic nature of the gel. ...
متن کاملIsothermal and cyclic oxidation of TiAl composites
Titanium Aluminide and TiAl matrix composites reinforced with alumina fibers (PRD166) were fabricated by powder metallurgy. During isothermal oxidation at 950 and 1070 OC, composites containing PRD166 fibers exhibited larger weight gains than monolithic TiAI; the composites showed evidence of oxidation along the perimeter of the fibers. A fiber reaction, which was observed after oxidation in ai...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metals
سال: 2019
ISSN: 2075-4701
DOI: 10.3390/met9020265