Mineral-Oxide-Doped Aluminum Titanate Ceramics with Improved Thermomechanical Properties
نویسندگان
چکیده
منابع مشابه
Effect of re-oxidation firing on PTCR properties of Sm-doped barium titanate ceramics
The effect of reduction and re-oxidation firing on the PTCR properties of Sm-doped barium titanate ceramics was investigated for the application in multilayered PTC thermistors. The lattice parameters a, and c decreases monotonically with increasing oxygen concentration in the re-oxidation atmosphere, which seems to be related with an electrostatic Coulomb interaction between an oxygen vacancy ...
متن کاملThermoelectric Properties of Lanthanum-Doped Europium Titanate
The thermoelectric properties of lanthanum-doped polycrystalline perovskite-type europium titanate were measured from room temperature to 900K and compared to those of MTiO3 (M 1⁄4 Ca, Sr, Ba). The differences in the titanates were calculated in terms of the differences of A-site ion and Ti–O distance that determined the covalent bonding strength. The A-site ion appeared to have little influenc...
متن کاملDc and Ac Electrical Properties of Ptc Barium Titanate Ceramics
The dc and ac electrical properties of PTC barium titanate ceramics were measured in the temperature range from 30 to 450°C. The Heywang's model alone is not sufficient to perform a quantitative analysis of the results. The heterogeneity of the system is taken into account.
متن کاملLarge Electrocaloric Effect in Relaxor Ferroelectric and Antiferroelectric Lanthanum Doped Lead Zirconate Titanate Ceramics
Both relaxor ferroelectric and antiferroelectric materials can individually demonstrate large electrocaloric effects (ECE). However, in order to further enhance the ECE it is crucial to find a material system, which can exhibit simultaneously both relaxor ferroelectric and antiferroelectric properties, or easily convert from one into another in terms of the compositional tailoring. Here we repo...
متن کاملSynthesis of Barium-zinc-titanate Ceramics
Mixtures of BaCO3, ZnO and TiO2 powders, with molar ratio of 1:2:4, were mechanically activated for 20, 40 and minutes in a planetary ball mill. The resulting powders were compacted into pellets and isothermally sintered at 1250 °C for 2h with a heating rate of 10 °C/min. X-ray diffraction analysis of obtained powders and sintered samples was performed in order to investigate changes of the pha...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Ceramics
سال: 2013
ISSN: 2090-8628,2090-8644
DOI: 10.1155/2013/214974