Mimicking layer inversion in solid-liquid fluidized beds in narrow tubes
نویسندگان
چکیده
منابع مشابه
Pressure Drop in Liquid-Solid Circulating Fluidized Beds
An experiment was conducted to obtain data of pressure drop in riser tubes of liquid-solid circulating fluidized beds. In the experiment, 2 kinds of riser tube having a diameter of 24mm and 36mm were used. Tested particles were of glass and ceramics, and their diameter range was from 2.10 to 4.95mm. Water at ambient conditions was used as the fluidizing fluid. Pressure drop in riser tubes was m...
متن کاملHeat Transfer Mechanisms in a Gas – Liquid-Solid Fluidized Beds
Three-Phase Fluidized Beds have found an important place in processing technology as Reactors. Gas-Liquid-Solid fluidization is considered in the present paper as operating bed of fluidized solid particles simultaneously with co-current upward flow of a continuous liquid phase and a gaseous phase dispersed in the form of bubbles. In the present study, the experimental work of the author on heat...
متن کاملEffect of internal tubes on the flow structures in gas-solid fluidized beds
The influence of internal tubes present in the fluidized bed on its hydrodynamic behavior was examined in this study. One tube was completely immersed in the bed of 650 m glass beads at 10 cm above the air distributor in the 15 cm inner diameter fluidized bed column of aspect ratio 1. The pressure fluctuations signal was collected over 300 s and was consequently analyzed by the both statistical...
متن کاملHeat Transfer of Liquid/ Solid Fluidized Beds for Newtonian and Non-Newtonian Fluids
The excellent performance of fluidized bed heat exchangers is due to the interaction between particles and heat transfer surface and to the mixing effects in the viscous sublayer. In this paper, the results of experimental investigations on heat transfer for a wide range of Newtonian and non-Newtonian (shear-thinning power law) fluids are presented. New design equations have been developed ...
متن کاملA generalized correlation for equilibrium of forces in liquid–solid fluidized beds
Following a critical publication review on the expansion of fluidized bed with the fluid velocity, the well-known Richardson–Zaki equation is applied to develop a more accurate relationship linking the apparent drag force Fd, the effective gravitational force Fg and the voidage of fluidized beds under intermediate regime. A correcting constant a in the relationship is a function of Archimedes n...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Powder Technology
سال: 2020
ISSN: 0032-5910
DOI: 10.1016/j.powtec.2019.09.089