Milk Protein-Based Edible Films: Influence on Mechanical, Hydrodynamic, Optical and Antioxidant Properties

نویسندگان

چکیده

Edible films are thin preformed layers that provide food protection against adverse environmental conditions. Despite milk proteins being functional ingredients can interesting features to films, there is scarce information evaluating their influence on film properties and stability. For this reason, research work compared the mechanical (thickness, tensile strength, elongation at break), hydrodynamic (moisture content, water solubility, swelling ratio, vapor transmission rate), color antioxidant (DPPH) of edible based casein whey protein isolate (two types, WPI1 WPI2). Films with displayed highest thickness (0.193 mm), break (49.67%), moisture content (40.21%) capacity (32.64% DPPH inhibition), while obtaining lowest rate (15.28 g/m2·day). Significant differences were found in properties, mainly between those made WPI. containing WPI2 statistically similar thickness, strength properties. The results showed depended type used. Thus, it important evaluate provided by different formulations for properly preserve food.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Moisture Sensitivity, Optical, Mechanical and Structural Properties of Whey Protein-Based Edible Films Incorporated with Rapeseed Oil.

The objective of this work is to study the effect of the rapeseed oil content on the physical properties of whey protein emulsion films. For this purpose, whey protein films with the addition of 0, 1, 2 and 3% of rapeseed oil, and glycerol as a plasticizer were obtained by the casting method. Film-forming emulsions were evaluated and compared using light scattering granulometry. The Sauter mean...

متن کامل

Protein-Based Edible Films: Characteristics and Improvement of Properties

Protein-based edible films have received consideration attention in recent years because of their advantages, including their use as edible packaging materials, over the synthetic films. In addition, protein-based edible films can also be used for the individual packaging of small portions of food, particularly products that are not currently individually packaged for practical reasons, such as...

متن کامل

Influence of Co and Fe substitution on optical and structural properties of zinc oxide thin films

Zn0.97TM0.03O (TM = Co, Fe) thin films were deposited onto glass substrates by the sol–gel method and the effects of transition metals substitution on structural and optical properties of ZnO films were investigated. The X-ray diffraction patterns revealed that the films have wurtzite structure. Optical transmittance of the films was recorded in the range of 200 -800 nm wave length and the band...

متن کامل

Effect of Different Formulations on Mechanical and Physical Properties of Calcium Alginate Edible Films

Background: Environmental problems of the plastic materials used in food packaging and the demand for food quality improvements lead to the development of packaging in natural materials. Edible films such as calcium alginate extend the shelf life by acting as a selective barrier against moisture and oxygen. The main objective of this study was to explore a calcium alginate based edible film to ...

متن کامل

Optimization of Edible Alyssum homalocarpum Films for Physical and Mechanical Properties

The effect of dry material, glycerol and ratio of water to seed in alyssum homalocarpum films on their thickness, transparency, moisture content, tensile strength, elongation and water vapor permeability was investigated using mixture response surface methods. Dry material and glycerol were important factors influencing tensile strength, elongation and water vapor permeability. Ratio of water t...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Coatings

سال: 2022

ISSN: ['2079-6412']

DOI: https://doi.org/10.3390/coatings12020196