Microwave sintering of biogenic hydroxyapatite ceramics for reconstructive surgery
نویسندگان
چکیده
منابع مشابه
Microwave Sintering of Thermistor Ceramics
Microwave sintering is a new sintering technology developed in the middle to late period of the 1980’s, which is characterized by fast densification for ceramic materials[1]. In recent years, microwave heating has been well employed in the field of sintering and joining of ceramics as a result of its advantages against conventional methods. These ceramic materials include oxides, mixed oxides, ...
متن کاملMicrowave Sintering of Ceramics for Dentistry: Part 2
Each tooth was then placed upon the reticulated zirconia in the thermal containment box and the technique of Microwave Hybrid Heating (MHH) was applied. The temperature measurements were taken every two minutes. We attempted to sinter the teeth in the microwave furnace with both fast and gradual heating rate (per minute) by manipulating the power rate. The power was increased gradually for few ...
متن کاملOn the Mechanism of Microwave Flash Sintering of Ceramics
The results of a study of ultra-rapid (flash) sintering of oxide ceramic materials under microwave heating with high absorbed power per unit volume of material (10-500 W/cm³) are presented. Ceramic samples of various compositions-Al₂O₃; Y₂O₃; MgAl₂O₄; and Yb(LaO)₂O₃-were sintered using a 24 GHz gyrotron system to a density above 0.98-0.99 of the theoretical value in 0.5-5 min without isothermal...
متن کاملSintering of Ceramics
Sintering with low frequency rf power (-50 M H z ) is a new technique with unique capabilities that has been used to sinter a variety of ceramic materials, including zirconia-toughened alumina, alumina, silicon carbide, and boron carbide. Processing with low frequencies offers many advantages compared to processing with conventional microwave frequencies (915 MHz and 2.45 GHz). Because of the l...
متن کاملHydroxyapatite and Hydroxyapatite-Based Ceramics
Data are summarized on the synthesis of hydroxyapatite (HA) by wet-chemical processes, solidstate reactions, and hydrothermal treatment. The conditions for HA preparation via precipitation from solutions of calcium chloride, dibasic ammonium phosphate, and aqueous ammonia are discussed at length. Detailed analysis of the fabrication and properties of calcium-phosphate-based ceramics is presente...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Processing and Application of Ceramics
سال: 2014
ISSN: 1820-6131,2406-1034
DOI: 10.2298/pac1401001t