Microwave Moisture Sensing of Seedcotton: Part 1: Seedcotton Microwave Material Properties

Microwave Moisture Sensing of Seedcotton: Part 1: Seedcotton Microwave Material Properties

Moisture content at harvest is a key parameter that impacts quality and how well the cotton crop can be stored without degrading before processing. It is also a key parameter of interest for harvest time field trials as it can directly influence the quality of the harvested crop as well as skew the results of in-field yield and quality assessments. Microwave sensing of moisture has several uniq...

Low-Cost Electronic Microwave Calibration for Rapid On-Line Moisture Sensing of Seedcotton

In order to improve rapid on-line moisture sensing of seedcotton in cotton gins, a means by which to establish a reliable low-cost wide-band electronic calibration is critically needed. This calibration is needed to center the circuit due to changes in the internal signal delays and attenuation drift caused by temperature changes in the various system components and circuit elements. This resea...

Microwave Remote Sensing of Soil Moisture

Because of the large contrast between the dielectric constant of liquid water and that of dry soil at microwave wavelength, there is a strong dependence of the thermal emission and radar backscatter from the soil on its moisture content. This dependence provides a means for the remote sensing of the moisture content in a surface layer approximately 5 cm thick. The feasibility of these technique...

Soil Moisture Sensing with Microwave Radiometers

Soil Moisture Sensing via Swept Frequency Based Microwave Sensors

There is a need for low-cost, high-accuracy measurement of water content in various materials. This study assesses the performance of a new microwave swept frequency domain instrument (SFI) that has promise to provide a low-cost, high-accuracy alternative to the traditional and more expensive time domain reflectometry (TDR). The technique obtains permittivity measurements of soils in the freque...