Microstructures of Sputtered PbTiO3 Thin Films.
نویسندگان
چکیده
منابع مشابه
Ultraviolet detectors in thin sputtered ZnO films.
Sputtering of ZnO is a well-known technique.'9 The application of sputtered thin films of ZnO has mainly been as surface acoustic wave transducers. To our knowledge nobody has yet used these films as detectors for UV radiation. Measurements of the intensity of UV radiation, for example in medical applications in connection with UV irradiation of the skin, are very inaccurate due to the lack of ...
متن کاملInvestigation of thickness-dependent stress in PbTiO3 thin films
X-ray diffraction (XRD) and Raman spectroscopy were used to investigate stress dependence on thickness in PbTiO3 (PTO) films grown by pulsed liquid injection Metalorganic Chemical Vapor Deposition on a LaAlO3 (001) substrate (LAO). Films on sapphire substrate (R-plane) were used as polycrystalline film reference. Epitaxial PTO films with a dominant c-domain structure are grown on LAO substrate ...
متن کاملStructure and magnetic properties of sputtered thin films of Fe0M79Ge0.21
Films of Fee.79Geez1 with thicknesses of 300 nm were synthesized by ion beam sputtering, and were annealed at temperatures from 200 to 550 “C. The materials were characterized by x-ray diffractometry, Mdssbauer spectrometry, vibrating sample magnetometry, ferromagnetic resonance spectrometry, and electrical resistivity measurements. The as-prepared materials comprised chemically disordered bee ...
متن کاملShort-circuit boundary conditions in ferroelectric PbTiO3 thin films
We examine the application of short-circuit electrical boundary conditions in density-functional theory calculations of ferroelectric thin films. Modeling PbTiO3 films with metallic electrodes, we demonstrate that under periodic boundary conditions of supercells, short-circuit conditions for the electrodes are equivalently satisfied in two repeated slab geometries: a PbTiO3/metal superlattice g...
متن کاملMechanical properties of sputtered silicon nitride thin films
Silicon nitride thin films were prepared by reactive sputtering from different sputtering targets and using a range of Ar/N2 sputtering gas mixtures. The hardness and the Young’s modulus of the samples were determined by nanoindentation measurements. Depending on the preparation parameters, the obtained values were in the ranges 8–23 and 100–210 GPa, respectively. Additionally, Fourier-transfor...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Hyomen Kagaku
سال: 1995
ISSN: 0388-5321,1881-4743
DOI: 10.1380/jsssj.16.410