Microstructures and mechanical properties of Al-Mg2Si eutectic alloys unidirectionally solidified.
نویسندگان
چکیده
منابع مشابه
Effects of Complex Modification by Sr–Sb on the Microstructures and Mechanical Properties of Al–18 wt % Mg2Si–4.5Cu Alloys
This research was carried out to investigate the influence of Sr–Sb on the microstructures and mechanical properties of Al–18 wt % Mg2Si–4.5Cu alloys. After the addition of 0.2 wt % Sr–Sb, the morphologies of primary Mg2Si transformed from equiaxed dendrite to cube in as-cast alloys and the average size of primary Mg2Si decreased from ~50 to ~20 μm. The shape of eutectic Mg2Si changed from Chin...
متن کاملGrowth directions in directionally solidified Al–Zn and Zn–Al alloys near eutectic composition
Growth directions and crystallographic orientations of solidification microstructures have been measured in Al–Zn alloy near the eutectic composition. Al dendrites in Al–92 wt.% Zn alloy were found to grow along the h110i directions while Zn dendrites in Al– 96 and 98 wt.% Zn have h10 10i trunks. In the lamellar eutectic, a crystallographic relationship has been found between the dense plane of...
متن کاملFe–Al–Mn–C lightweight structural alloys: a review on the microstructures and mechanical properties
Adding a large amount of light elements such as aluminum to steels is not a new concept recalling that several Fe-Al-Mn-C alloys were patented in 1950s for replacement of nickel or chromium in corrosion resistance steels. However, the so-called lightweight steels or low-density steels were revisited recently, which is driven by demands from the industry where steel has served as a major structu...
متن کاملdetermination of some physical and mechanical properties red bean
چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...
15 صفحه اولPrecipitation in a Ni - Al - Mo Directionally Solidified Eutectic Composite
The most recently developed high temperature materials are known as in-situ composites or directionally solidified eutectics. Since the composites are formed during solidification, they have excellent morphological stabilities up to near their melting temperatures. The Ni-Al-Mo system has received the greatest attention for recent several years(1)~(3) since the alloy is expected to form a struc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Japan Institute of Light Metals
سال: 1984
ISSN: 0451-5994
DOI: 10.2464/jilm.34.562