Microstructure Prediction during Incremental Processes for Hot Forming of 718 Alloy
نویسندگان
چکیده
منابع مشابه
Characterization of the Dendritic Microstructure of Investment Cast Alloy 718
The as-cast alloy 718 shows a multiphasic structure which consists of dendrites, carbides and Laves phases. The amount, size, shape, and dispersion of these phases affect the properties and the processing which follows, This structure was characterized by measurements of volume fraction, size, dispersion, and shape factor of carbide and Laves phases. Secondary arm spacing and Vickers hardness w...
متن کاملModeling and Simulation of Alloy 718 Microstructure and Mechanical Properties
Alloy 718 is a unique superalloy that has been in use for a number of years. It also has the distinction to be utilized throughout the aerospace and general industrial communities. The applications for this material are often very unique and require tailoring of the microstructure and subsequently the mechanical properties to meet these specific needs. To support optimization of Alloy 718 mecha...
متن کاملThe Effects of Forming Parameters on the Single Point Incremental Forming of 1050 Aluminum Alloy Sheet
The single point incremental forming (SPIF) is one of the dieless forming processes which is widely used in the sheet metal forming. The correct selection of the SPIF parameters influences the formability and quality of the product. In the present study, the Gurson-Tvergaard Needleman (GTN) damage model was used for the fracture prediction in the numerical simulation of the SPIF process of alum...
متن کاملEvaluation of Ductile Damage Criteria in Hot Forming Processes
The process of ductile fracture which occurs due to the accumulation, growth and combination of defects or cracks of material is called ductile damage. Failure in materials can be predicted, using damage mechanics and damage criteria. On the other hand, most of the materials depended to the manufacturing process, are formed in warm or hot conditions so that; the temperature also affects on the ...
متن کاملDual–Phase Hot–Press Forming Alloy
Hot–press forming steels are formed in a fully austenitic state followed by die– quenching in order to generate martensite and achieve a strong steel. The ductility however, tends to be limited. We explore in this work a novel steel design in which the forming operation is in the two–phase austenite and ferrite field, so that the quenching results in a dual–phase ferrite and martensite microstr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Advanced Materials Research
سال: 2011
ISSN: 1662-8985
DOI: 10.4028/www.scientific.net/amr.278.186