Microstructure of Heavily Deformed Magnesium-Lithium Composites Containing Steel Fibers
نویسندگان
چکیده
منابع مشابه
Microstructure of heavily deformed magnesium-lithium composites containing steel fibers
The microstructure of deformation-processed metal-metal composites (DMMC) of Mg-Li alloys containing steel reinforcing fibers was characterized to correlate the fiber size to the deformation strain and mechanical properties of the composite material. Micrographs taken using scanning and transmission electron microscopy techniques revealed fiber sizes larger than predicted from the deformation a...
متن کاملProcessing and mechanical properties of magnesium-lithium composites containing steel fibers
Deformation-processed metal-metal composites (DMMC) of Mg-Li alloys containing steel reinforcing fibers were prepared by infiltrating a preform of steel wool with the molten matrix. The Li content was varied to control the crystal structure of the matrix; Mg-4 wt pct Li is hexagonal close packed (hcp), while Mg-12 wt pct Li is body-centered cubic (bcc). The low carbon steel used as the reinforc...
متن کاملInvestigation of Mechanical Properties of Lithium-Based Geopolymer Composites Reinforced with Basalt Fibers
Recently, geopolymer binders have been considered because of low cost, simple processes for synthesis and many raw materials in nature. Geopolymer with brittle nature does not have high strength and cannot be used alone for structural materials. Therefore, to use in different structures, the composite which is reinforced with fibers such as carbon, glass, basalt, etchasbeen used. In this resear...
متن کاملObservations on Heavily Deformed Tantalum
The deformation of metals having the body-centered cubic (BCC) crystal lattice [1] is thought to occur by the glide of dislocations with a Burgers vector of 1 /2<111> [2, 3] or by twinning [4]. The present study is concerned with the deformation of the BCC, period-6 (third-series), transition metal, Tantalum [5, 6]. Although the slip planes have been discussed and modeled since before 1970 (see...
متن کاملProperties of Lignocellulosic Composites Containing Regenerated Cellulose Fibers
The aim of the paper was to examine the application of regenerated cellulose fibers as a reinforcement material in particleboard production. Single-layer, 10 mm thick panels, with the density of 800 kg/m3 were produced with addition of regenerated cellulose fibers in the range of 0 do 15% by mass during panels’ production. The mechanical and physical parameters of the produced panels were teste...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Materials Engineering and Performance
سال: 1998
ISSN: 0000-0000,1059-9495
DOI: 10.1361/105994998770347828