Microstructure Observation of High-Current Buried-Arc Welded Joint
نویسندگان
چکیده
منابع مشابه
Microstructure and Mechanical Properties of Narrow Gap Laser-Arc Hybrid Welded 40 mm Thick Mild Steel
Both laser-arc hybrid welding and narrow gap welding have potential for the fabrication of thick sections, but their combination has been seldom studied. In this research, 40 mm thick mild steel was welded by narrow gap laser-arc hybrid welding. A weld with smooth layer transition, free of visible defects, was obtained by nine passes at a 6 mm width narrow gap. The lower part of the weld has th...
متن کاملMicrostructure and Tensile Behavior of Laser Arc Hybrid Welded Dissimilar Al and Ti Alloys
Fiber laser-cold metal transfer arc hybrid welding was developed to welding-braze dissimilar Al and Ti alloys in butt configuration. Microstructure, interface properties, tensile behavior, and their relationships were investigated in detail. The results show the cross-weld tensile strength of the joints is up to 213 MPa, 95.5% of same Al weld. The optimal range of heat input for accepted joints...
متن کاملMicrostructure and Mechanical Properties of the Friction Welded Joint between X53CrMnNiN219 and X45CrSi93 Stainless Steel
Dissimilar metals friction welding of austenitic–martensitic stainless steels is commonly used in order to manufacture engine valves in the automobile industry. In this study, X53CrMnNiN219 (austenitic stainless steel) and X45CrSi93 (martensitic stainless steel) valve steel rods were welded by friction welding process. The welded joint was then heat treated at 760 0C for 60 min. Mechanical prop...
متن کاملInvestigating the Effect of Current Type (Direct and Pulsed) on Microstructure and Mechanical Properties of Hastelloy B-2 Superalloy Welded Joint by GTAW Process
In this research, Gas tungsten arc welding (GTAW) on Hastelloy B-2 Superalloy was used to investigate the effect of current type on microstructure and mechanical properties of welded zone. The welding process was performed using two direct and pulsed current and with Hastelloy X filler metal. Optical Microscope (OM) and Scanning Electron Microscope (SEM) were used to investigate the microstruct...
متن کاملEffect of Microstructure on Tensile Properties of Austenite-ferrite Welded Joint
R. Bakić, Tutin High School, Serbia, M. O. Abukresh, A. Sedmak. Faculty of Mechanical Engineering, University of Belgrade, Serbia, I. Samardžić, Faculty of Mechanical Engineering, Slavonski Brod, University of Osijek, Croatia, R. Jovičić, Innovation centre of the Faculty of Mechnical Engineering, Belgrade, Serbia Complex microstructure of austenite-ferrite welded joint has been investigated, fo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY
سال: 2020
ISSN: 0288-4771,2434-8252
DOI: 10.2207/qjjws.38.11s