Microstructure evolution and deformation texture during rolling of TIMETALⓇ 407
نویسندگان
چکیده
منابع مشابه
Microstructure and micro-texture evolution during large strain deformation of Inconel alloy IN718
Article history: Received 2 January 2015 Received in revised form 22 October 2015 Accepted 23 October 2015 Available online 27 October 2015 The hot deformation behaviour of Inconel alloy IN718 was studied in the temperature range of 950–1100 °C and at strain rates of 0.01 and 1 s with a view to understand the microstructural evolution as a function of strain rate and temperature. For this purpo...
متن کاملEFFECT OF FINISH ROLLING TEMPERATURE ON MICROSTRUCTURE,TEXTURE AND PLANAR ANISOTROPY IN ALUMINUM ALLOY AA3004 SHEETS
AA3004 alloy is widely used in can making. The major concern in the production of canbodies is earing, which develop by high planar anisotropy of rolled sheet. Balance ofrecrystallisation and rolling textures together with a uniform and fine grain microstructure canminimize the earing. The effects of finish rolling temperature (FRT) on planar anisotropy,microstructure, texture development and m...
متن کاملMicrostructure Evolution during Tensile Deformation of a Nanostructured Bainitic Steel
In situ neutron diffraction experiment was used during tensile testing at room temperature to examine the changes on the percentage and texture of both ferrite and austenite in a nanocrystalline bainitic steels transformed at two different temperatures 200°C and 300oC for different times to achieve the same phase percentages. Both samples showed an inadequate capability of austenite to transfor...
متن کاملInternal strain and texture evolution during deformation twinning in magnesium
The development of a twinned microstructure in hexagonal close-packed rolled magnesium compressed in the in-plane direction has been monitored in situ with neutron diffraction. The continuous conversion of the parent to daughter microstructure is tracked through the variation of diffraction peak intensities corresponding to each. Approximately 80% of the parent microstructure twins by 8% compre...
متن کاملMicrostructure and micro-texture evolution during large strain deformation of an aluminium–copper–lithium alloy AA 2195
Article history: Received 12 July 2014 Accepted 11 September 2014 Available online 20 September 2014 A single hit, hot isothermal plane strain compression (PSC) test was used to understand the microstructural evolution during large strain deformation of aluminium–copper–lithium alloy AA 2195. Hot isothermal PSC tests were conducted in the temperature range of 300–450 C and at strain rates of 0....
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materialia
سال: 2020
ISSN: 2589-1529
DOI: 10.1016/j.mtla.2020.100596