Microstructure, degradation properties and cytocompatibility of micro-arc oxidation coatings on the microwave sintered Ti-15Mg metal-metal composite
نویسندگان
چکیده
منابع مشابه
Microstructure and Mechanical Properties of Direct Metal Laser Sintered Ti- 6al-4v
Direct metal laser sintering (DMLS) is a selective laser melting (SLM) manufacturing process that can produce near net shape parts from metallic powders. A range of materials are suitable for SLM; they include various metals such as titanium, steel, aluminium, and cobalt-chrome alloys. This paper forms part of a research drive that aims to evaluate the material performance of the SLM-manufactur...
متن کاملBio-tribological properties and cytocompatibility of Ti-Si-N coatings
TieSieN coatings are synthesized on titanium alloy (Ti6Al4V) by arc-enhanced magnetron sputtering and the microstructure and tribological properties are determined. The friction coefficient of the TieSieN coatings, which is smaller in human serum than ambient air, decreases gradually with Si contents. Protein gel electrophoresis shows that the small friction coefficient is due to adsorbed prote...
متن کاملEvaluation of tribological properties of (Ti,Al)CN/DLC composite coatings deposited by cathodic arc method.
In this study, Ti, Al and N doped DLC – referred to here after as “(Ti,Al)CN/DLC composite”- coating and pure diamond-like coating (DLC) were produced by cathodic arc deposition technique and the effects of the coating thickness on their tribological properties were evaluated. The coatings were characterized, using scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray diffrac...
متن کاملn-SiO2 Embedded HA/TiO2 Composite Coatings Deposited on Pure Titanium Substrate by Micro-Arc Oxidation
As orthopaedic and dental metallic implant materials, titanium and titanium alloys are widely used due to their relatively low modulus, good fracture toughness, excellent strenthto-weight ration, and superior biocompatibility and corrosion resistance (Long and Rack, 1998). They have become the first choice above all other candidate metallic implant materials such as Co-Cr-Mo alloys, stainless s...
متن کاملMicrostructure and electrical properties of microwave-sintered PTC thermistors.
BaTiO3-based positive temperature coefficient (PTC) thermistors have been prepared by microwave sintering. The sintering process was carried out in a 2.45 GHz multimode microwave tube furnace without any susceptor The heating behavior of the PTC material, influence of processing conditions on microstructure, and electrical properties of the sintered samples were investigated. The sintering temp...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Materials Research and Technology
سال: 2021
ISSN: 2238-7854
DOI: 10.1016/j.jmrt.2021.02.004