Microstructure Control of Particle Reinforced Metal Matrix Composites Fabricated by Low-Pressure Infiltration Process
نویسندگان
چکیده
منابع مشابه
Wear of ceramic particle-reinforced metal-matrix composites
Wear experiments have shown that when the applied normal stress exceeds a critical value, a transition occurs from the regime of mild wear to that of adhesive wear. As a result, the wear rate of particle-reinforced aluminium composites increases by a hundred-fold. Based on dislocation and delamination theories, a criterion is proposed for determining the critical transition load, and a quantita...
متن کامل3D Microstructure Visualization of SiC Particle Reinforced Al Matrix Composites by X-Ray Synchrotron Tomography
Microstructural aspects of composites such as particle size, shape, and distribution play important roles in deformation behavior. 3D visualization of porosity and Fe-rich inclusions in three dimensions is critical to a thorough understanding of fatigue resistance of metal matrix composites (MMC) because cracks often initiate at these defects. In this paper we have used X-ray synchrotron tomogr...
متن کاملCasting of SiC Reinforced Metal Matrix Composites
Composites based on two aluminium alloys (A536 and 6061) reinforced with 10% or 20% volume fraction of SiC particles were produced by gravity casting and a novel two-step mixing method was applied successfully to improve the wettability and distribution of the particles. The SiC particles were observed to be located predominantly in the interdendrit ic regions, and a thermal lag model is propos...
متن کاملMetal Matrix Composites Reinforced by Nano-Particles—A Review
Metal matrix composites reinforced by nano-particles are very promising materials, suitable for a large number of applications. These composites consist of a metal matrix filled with nano-particles featuring physical and mechanical properties very different from those of the matrix. The nano-particles can improve the base material in terms of wear resistance, damping properties and mechanical s...
متن کاملDamage accumulation and mechanical properties of particle-reinforced metal–matrix composites during hydrostatic extrusion
The effects of hydrostatic extrusion on particle cracking and on the subsequent tensile properties of some prototypical particlereinforced metal–matrix composites are investigated. In most cases, tensile failure occurs through a plastic instability in accordance with the Considere criterion for necking. The corresponding failure strain is therefore dictated by the global flow and hardening char...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATERIALS TRANSACTIONS
سال: 2002
ISSN: 1345-9678,1347-5320
DOI: 10.2320/matertrans.43.2629