Microstructure and Wear of Cathodic Arc Physical Vapour Deposited on TiAlN, TiCrN and n TiAlN Alpha Si3N4 Films
نویسندگان
چکیده
منابع مشابه
Comparison of Properties of Ti/TiN/TiCN/TiAlN Film Deposited by Cathodic Arc Physical Vapor and Plasma-assisted Chemical Vapor Deposition on Custom 450 Steel Substrates
This study investigated the effects of deposition techniques on the microstructural and tribological properties of Ti/TiN/TiCN/TiAlN multilayer coatings onto a Custom 450 steel substrate. The coatings were produced using cathodic arc physical vapor deposition (CAPVD) and plasma-assisted chemical vapor deposition (PACVD). The microstructural of the coatings was evaluated using (SEM), and phase f...
متن کاملCorrosion resistance of CrAlN and TiAlN coatings deposited by lateral rotating cathode arc
In this work, CrAlN and TiAlN coatings were deposited on stainless steel substrates by a vacuum arc reactive deposition process from two lateral rotating elemental aluminum and chromium or titanium cathodes in a flowing pure nitrogen atmosphere. The composition and crystalline structure of the as-deposited coatings was analyzed by energy dispersive analysis of X-rays (EDX) and X-ray diffraction...
متن کاملHigh temperature behavior of arc evaporated ZrAlN and TiAlN thin films
Hard coatings can extend the life time of a tool substantially and enable higher cutting speeds which increase the productivity in the cutting application. The aim with this thesis is to extend the understanding on how the microstructure and mechanical properties are affected by high temperatures similar to what a cutting tool can reach during operation. Thin films of ZrAlN and TiAlN have been ...
متن کاملCOMPARISON OF THE CrN , TiN AND (Ti, Cr)N PVD COATINGS DEPOSITED BY CATHODIC ARC EVAPORATION
In the present study, CrN, TiN and (Ti, Cr)N coatings were deposited on D6 tool steel substrates. Physical and mechanical properties of coatings such as microstructure, thickness, phase composition, and hardness were evaluated. Phase compositions were studies by X-ray diffraction method. Mechanical properties were determined by nano-indentation technique. The friction and wear behaviour of the ...
متن کاملCharacterization of TiN, CrN and (Ti, Cr) N Coatings Deposited by Cathodic ARC Evaporation
In this investigation PVD Ti-Cr)N coatings were deposited on hardened and tempered tool steel substrates using reactive arc evaporation. Physical and mechanical properties of coatings such as roughness, thickness, phase composition, hardness and modulus young and coefficient friction were evaluated. Phase compositions were studies by X-ray diffraction method. The surface microstructure and morp...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Defence Science Journal
سال: 2020
ISSN: 0976-464X,0011-748X
DOI: 10.14429/dsj.70.15661