Microstructure and tribological properties of in-situ formed Al3Zr/A356 composite
نویسندگان
چکیده
منابع مشابه
the study of reactions mechanism, microstructure and mechanical properties of in situ composite produced in al-v2o5 system
in this research, fabrication of an in-situ composite via aluminothermic combustion synthesis in al–v2o5 system has been investigated. for this purpose, the mixed powders of al and v2o5 with molar ratio of 28 to 3 were ball milled and then compressed. differential thermal analysis was used to evaluate the temperatures of phase transitions. using the peak temperature of the reactions, the sample...
متن کاملEvaluation of Mechanical and Tribological Properties of Glass/Carbon Fiber Reinforced Polymer Hybrid Composite
Polymer matrix composites used in different industrial applications due to their enhanced mechanical properties and lightweight. However, these materials are subjected to friction and wear situations in some industrial and automobile applications. Therefore, there is a need to investigate the wear properties of polymer matrix composite materials. This article emphasizes the dry abrasive wear be...
متن کاملCrystallization Behavior and Mechanical Properties of In-situ Alumina-Zirconia Composite Bodies
In-situ alumina-zirconia composite bodies were fabricated by heat treatment of gibbsite-zircon-kaolinite mixture at 1450℃. The current research investigated crystallization behavior and mechanical properties of the mentioned mixture in the presence of 5 wt.% MgO as an additive. X-ray diffraction (XRD) results showed that alumina, zirconia, and magnesium aluminosilicate were crystallized during ...
متن کاملThe Effect of Heat Treatment on the Microstructure and Mechanical Properties of Al/Al3Zr + Al3Ti In-situ Hybrid Composite Fabricated by Friction Stir Processing
In this research, an in-situ hybrid composite reinforced by Al3Zr and Al3Ti aluminide particles was fabricated by friction stir processing (FSP). The base metal was in the form of a rolled Al 3003-H14 alloy sheet, and zirconium and titanium metal powders were used as the reinforcements. Six passes of FSP were applied. Tensile strength and hardness of the base metal, as well as FSPed samples bef...
متن کاملSynthesis, Characterization and Transport Properties of Novel Ion-exchange Nanocomposite Membrane Containing In-situ Formed ZnO Nanoparticles
A new type of cation-exchange nanocomposite membranes was prepared by in-situ formation of ZnO nanoparticles in a blend containing sulfonated poly (2,6-dimethyl-1,4-phenylene oxide) and sulfonated polyvinylchloride via a simple one-step chemical method. As-synthesized nanocomposite membranes were characterized using Fourier transform infrared spectroscopy, scan...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Research Express
سال: 2020
ISSN: 2053-1591
DOI: 10.1088/2053-1591/ab8d65