Microstructure and Texture of a Warmed Rolled IF Steel
نویسندگان
چکیده
منابع مشابه
Deformation Microstructure and Texture in a Cold-Rolled Austenitic Steel with Low Stacking-Fault Energy
Deformation microstructure and texture in a cold-rolled austenitic steel 310S with low stacking fault energy (SFE) have been investigated by SEM and TEM. When 310S plates were rolled by 95% in thickness reduction, a remarkable development of the brass-type preferred orientation was confirmed by X-ray diffraction. SEM observations of the specimens with such texture exhibited a layered structure ...
متن کاملEvolution of microstructure and texture during recovery and recrystallization in heavily rolled aluminum
The annealing behavior of nanostructured aluminum AA1050 prepared by cold rolling to an ultrahigh strain (vM = 6.4) has been investigated using both transmission electron microscopy and electron backscatter diffraction techniques, paying particular attention to changes in microstructure and texture during recovery and their influence on subsequent recrystallization. It is found that coarsening...
متن کاملEffect of Coiling Temperature on Microstructure, Properties and Resistance to Fish-Scaling of Hot Rolled Enamel Steel
The microstructure, mechanical properties, and hydrogen permeation behavior of hot rolled enamel steel were investigated. Three coiling temperatures were adopted to gain different sizes of ferrite grain and TiC precipitates. The results show that a large number of interphase precipitates of nano-sized TiC can be obtained at coiling temperatures of 650 and 700 °C, while a few precipitates are fo...
متن کاملMicrostructure and microtexture of highly cold-rolled commercially pure titanium
The microstructure and texture evolution of a commercially pure titanium sheet during cold-rolling is investigated in detail by X-ray diffraction and by orientation imaging in the FEG-SEM and in the TEM. The experimental data are compared with simulation results obtained by a viscoplastic self-consistent model. The aim of this work is to provide with a detailed description of the fine scale def...
متن کاملDetermination of Condition of Recrystallised Grains After Annealing of Cold Rolled IF Grade Steel Sheets Based on Ultrasonic Measurements
The Interstitial Free (IF) grade steel sheets are used for auto body applications where these sheets require good formability/drawability property. To achieve this property the cold rolled sheets are annealed to obtain desirable texture in the recrystallised grains to avoid material failure during forming operation. The paper deals with an ultrasonic technique to determine the condition of the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Textures and Microstructures
سال: 2000
ISSN: 0730-3300,1029-4961
DOI: 10.1155/tsm.34.243