Microstructure and Properties of ZrO2-AlN Composite Ceramics by Microwave Sintering
نویسندگان
چکیده
منابع مشابه
Microwave Sintering of Thermistor Ceramics
Microwave sintering is a new sintering technology developed in the middle to late period of the 1980’s, which is characterized by fast densification for ceramic materials[1]. In recent years, microwave heating has been well employed in the field of sintering and joining of ceramics as a result of its advantages against conventional methods. These ceramic materials include oxides, mixed oxides, ...
متن کاملMicrostructure of spark plasma sintered TiB2 and TiB2–AlN ceramics
In this research study, the effects of aluminum nitride (AlN) additive on the densification behavior and microstructure development of titanium diboride (TiB2) based ceramic matrix composite were investigated. In this way, a monolithic TiB2 ceramic and a TiB2–5 wt% AlN ultrahigh temperature ceramic composite were fabricated by spark plasma sintering (SPS) proces...
متن کاملMicrowave Sintering of High Thermal Conductivity Aln
In this study, a combustion synthesized AlN powder was sintered using microwave as heating source. The microwave was 2.45 GHz and the sintering process was carried out in a single-mode cavity. The sintering temperature was between 1800°C and 2000°C with a power ranging from 400 to 700W. The as-synthesized AlN was ground to under 2μm and yttria was used as sintering aid. The effects of the amoun...
متن کاملEffect of Microwave Sintering on the Microstructure and Dielectric Properties of Bi2O3-Doped (Ba0.6Sr0.4)(Ti0.94Cu0.06)O3 Ceramics
The effects of microwave sintering on the sintering behaviour, microstructure and dielectric properties of Bi2O3doped (Ba0.6Sr0.4)(Ti0.94Cu0.06)O3 (BSTC) ceramics were investigated. The microstructure and dielectric properties of a BSTC ceramic were also studied given different amounts of Bi2O3 doping. Microwave heating with sintering temperatures below 1000 ̊C significantly improves the densifi...
متن کاملPractical classes " Ceramics & Colloids " : TP 3 Sintering 1 TP 3 - Ceramics : Sintering and Microstructure
After the initial molding of the ceramic, whether by slip casting or dry pressing, it is still necessary to densify the compacted powder samples (green bodies) to form a continuous 3D structure and thus to get ceramic pieces appropriate for the selected application. Usually this is done by a sintering process which is a consolidation and densification step of the granular compact through the ac...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Inorganic Materials
سال: 2021
ISSN: 1000-324X
DOI: 10.15541/jim20210150