Microstructure and properties of the interlayer heat-affected zone in X80 pipeline girth welds
نویسندگان
چکیده
منابع مشابه
Influence of heat treatment on the microstructure and properties of laser welds in 8090
An investigation into the weldability of the Al-Li-Cu-Mg-Zr alloy 8090 using a CO, laser indicates that the grain structure and microstructure of the weld zone are sensitive to the post-weld heat treatment. If a slow heating rate of 1Krnin-I to the solution treatment temperature is used the formation of P' (AIJr) dispersoids is promoted which leads to a uniformly small grain size within the fus...
متن کاملStudy and Investigation on the Effect of Presence of Interlayer on the Microstructure, Mechanical Properties and Fracture Mode of AISI 321 Stainless Steel Resistance Spot Welds
In this paper, numerical and empirical investigations of the effect of AISI 347 stainless steel interlayer on the microstructure, mechanical properties and fracture mode of AISI 321 stainless steel resistance spot welds have been conducted. For this purpose, two types of joints, the first free from inter layer and the second contains interlayer with 0.05 mm thickness as well as difference curre...
متن کاملInterface and Heat-affected Zone Features of Dissimilar Welds between AISI 310 Austenitic Stainless Steel and Inconel 657
The aim of this paper is to characterize welding of AISI 310 austenitic stainless steel to Inconel 657 for use in oil-refining industries. The welds were produced using four types of filler materials; nickel-based alloys designated as Inconel 82, A, 617, and 310 SS. The interfaces and heat-affected zones were characterized by optical and scanning electron microscopy. Interfaces on the two sides...
متن کاملStudy and Investigation on the Effect of Presence of Interlayer on the Microstructure, Mechanical Properties and Fracture Mode of AISI 321 Stainless Steel Resistance Spot Welds
In this paper, numerical and empirical investigations of the effect of AISI 347 stainless steel interlayer on the microstructure, mechanical properties and fracture mode of AISI 321 stainless steel resistance spot welds have been conducted. For this purpose, two types of joints, the first free from inter layer and the second contains interlayer with 0.05 mm thickness as well as difference curre...
متن کاملNumerical Simulation Of Heat Affected Zone Microstructure During Laser Surface Melting
Microstructural changes during laser welding and laser surface treatment has been regarded by many researchers. Most researches have focused on studying the effect of various process parameters on the size and microstructure of the heat affected zone. But some studies show that the initial microstructure of the base metal can also affect the heat affected zone dimensions and final microstructur...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Progress in Natural Science: Materials International
سال: 2020
ISSN: 1002-0071
DOI: 10.1016/j.pnsc.2019.08.010