Microstructure and mechanical properties of ultrafine grained copper processes by multiple isothermal forging
نویسندگان
چکیده
منابع مشابه
MICROSTRUCTURE AND MECHANICAL PROPERTIES OF THE ULTRAFINE-GRAINED COPPER TUBE PRODUCED BY SEVERE PLASTIC DEFORMATION
In this paper, cyclic flaring and sinking (CFS) as a new severe plastic deformation (SPD) method was employed to produce the ultrafine grain (UFG) copper tubes. The extra friction has eliminated in the CFS method that provided the possibility for production of longer UFG tubes compared to the other SPD methods. This process was done periodically to apply more strain and consequently finer grain...
متن کاملMechanical Properties and Microstructure Development of Ultrafine-grained Cu Processed by ECAP
Technical purity Cu (99.95 wt%) polycrystals have been processed at room temperature by equal channel angular pressing. The results of mechanical tests and the microstructure characterization by various experimental techniques are presented. The yield stress as well as the strength were shown to increase with increasing strain and exceed the respective values of a coarse-grained material. The m...
متن کاملAn Investigation on Mechanical Properties of Ultrafine Grained 316 Stainless Steel by Thermomechanical Treatment
In this paper, an advanced thermo-mechanical treatment was conducted on AISI 316 austenitic stainless steel. At first, three samples were rolled at the ambient temperature, the temperature of -20 ºC (dry ice and ethanol) and -196 ºC (liquid nitrogen). Then, the samples were annealed at 800 ºC in the time range of 1 to 15 minutes. In each step, the microhardness values of the samples were measur...
متن کاملStudy on the Effect of Laser Welding Parameters on the Microstructure and Mechanical Properties of Ultrafine Grained 304L Stainless Steel
In the present study, an ultrafine grained (UFG) 304L stainless steel with the average grain size of 300 nm was produced by a combination of cold rolling and annealing. Weldability of the UFG sample was studied by Nd: YAG laser welding under different welding conditions. Taguchi experimental design was used to optimize the effect of frequency, welding time, laser current and laser pulse duratio...
متن کاملMicrostructure of Ultrafine- Grained Metals after Ecap
This paper was aimed at verification of functionality of the ECAP technology at extrusion of the copper, alluminium alloys and steel. Experiments were made on equipment, which is demonstrated in the Fig 1. Deformation forces were measured during extrusion, resistance to deformation was calculated and deformation speed was determined approximately. Analysis of structure was made with use of ligh...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Letters on Materials
سال: 2011
ISSN: 2218-5046,2410-3535
DOI: 10.22226/2410-3535-2011-3-151-155