Microstructure and mechanical properties of Pb-4%Sb alloy processed by equal channel angular pressing
نویسندگان
چکیده
منابع مشابه
MICROSTRUCTURAL AND MECHANICAL CHARACTERISTICS OF AlSiMnFe ALLOY PROCESSED BY EQUAL CHANNEL ANGULAR PRESSING
V.A. Andreyachshenko, Faculty of Nanotechnology and Metallurgy, Karaganda state technical University, Karaganda, Kazakhstan A.B. Naizabekov, Mining and Metallurgy Faculty, Rudny Industrial Institute, Rudny, Kazakhstan In the present research, equal channel angular pressing (ECAP) was conducted. The defectness degree of the alloy for one pass and maximum strain was determined. Ultra fine grained...
متن کاملMicrostructure and its Relationship to Mechanical Properties in Equal Channel Angular Rolled Al6061 Alloy Sheets
Equal channel angular rolling (ECAR) is a severe plastic deformation (SPD) technique which has been used to produce metal sheets with ultra-fine grain structure. In the present work, the relationships between the mechanical properties and microstructure of samples during the ECAR process have been investigated. The Rietveld method was applied to analyze the X-ray diffraction pattern and to det...
متن کاملDevelopment Microstructure and Mechanical Properties of Commercially Pure Titanium Processed by Equal Channel Angular Pressing and Cold Drawing
Equal channel angular pressing has been used to refine the grain size of commercially pure titanium (grade 2) as well as other metals and alloys. Titanium grade 2 is usually processed at about 350 °C because it lacks sufficient ductility at lower temperatures. The warm processing temperature limits the capability of the equal channel angular pressing technique in improving the strength of titan...
متن کاملRe-strengthening in AA6063 Alloy During Equal Channel Angular Pressing
Equal channel angular pressing (ECAP) is carried out using two different configurations for the exit channel of the ECAP die, i.e., relieved and choked, with angles of 0.2 °. It is found that using a die with relieved exit channel, the sample was extruded for 6 passes with no surface cracks and an average cell size of 727 nm and a fraction of high angle grain boundaries of 54 % were achieved. M...
متن کاملAchieving superplastic properties in a ZK10 magnesium alloy processed by equal-channel angular pressing
Equal-channel angular pressing provides an opportunity for refining the grain structure and introducing superplastic properties in magnesium alloys. This report describes the use of this processing technique with a ZK10 (Mg–1.0 wt.% Zn–0.26 wt.% Zr) alloy. The grain structure was successfully refined from ∼12.9 to ∼5.2 m after 4 passes and superplastic elongations were observed when testing at ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Research
سال: 2006
ISSN: 1516-1439
DOI: 10.1590/s1516-14392006000100019