Microstructure and Mechanical Properties of Friction Stir Processed A356 Cast Al under Air Cooling and Water Cooling
نویسندگان
چکیده
منابع مشابه
Microstructure and Mechanical properties of Multipass Friction Stir Processed Aluminum Silicon Carbide Metal Matrix
Abstrct :In this study, SiC particles were incorporated by using Friction Stir Processing (FSP) into the 6351 aluminium alloy to form particulate composite materials. Sampels were subjected to constant rotational and traverse speeds of the FSP tool with and without SiC reinforcements. Microstructural observations were carried out by employing optical microscopy of the modifiedsurfaces. Mechanic...
متن کاملThe Effects of Mould Materials on Microstructure and Mechanical Properties of Cast A356 Alloy
Abstract In this study, the effects of mould materials on microstructure and mechanical properties of cast A356 Al alloy were investigated. The alloy was poured into three different moulds. Then the samples were homogenised and applied T6 heat treatment. The optical, Scanning Electron Microscopy (SEM) and Energy Dispersive Spectroscopy (EDS) studies were made. Secondary dendrite arm spacing (SD...
متن کاملThe Microstructure and Mechanical Properties of Friction Stir Welded Ti6al4v Titanium Alloy under Β Transus Temperature
1 Faculty of Aerospace Engineering, Shenyang Aerospace University, No. 37 Daoyi South Avenue, Daoyi Development District, Shenyang 110136, China 2 State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, No. 92 West Dazhi street, Nangang District, Harbin 100024, China 3 Beijing Aeronautical Manufacturing Technology Research Institute, No. 1 Dongjun Village, Chaoyang...
متن کاملEvaluation of microstructure and mechanical properties of friction stir welded copper / 316L stainless steel dissimilar metals
In the present research, friction stir welding (FSW) process was used for butt joining of pure copper plate to 316L stainless steel plate. Mechanical properties and microstructural characteristics of the joint were evaluated by microhardness and tensile tests as well as optical and scanning electron microscope (SEM). It was found that microstructure of the weld nugget (WN) has fine grains where...
متن کاملEffects of Friction Stir Process Parameters on Microstructure and Mechanical properties of Aluminum Powder Metallurgy Parts
The effects of friction stir processing (FSP) on the microstructure and mechanical properties of aluminum powder metallurgy (PM) parts was investigated. PM parts were then subjected to FSP at advancing speeds (v) of 40-200 mm/min and tool rotational speeds (ω) of 800-1600 rpm. Microhardness (HV) and tensile tests at room temperature were used to evaluate the mechanical properties of the frictio...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: High Temperature Materials and Processes
سال: 2018
ISSN: 0334-6455,2191-0324
DOI: 10.1515/htmp-2017-0036