Microstructure and mechanical properties of cold drawn AISI 1016 steel processed by ECAP
نویسندگان
چکیده
منابع مشابه
Mechanical Properties and Microstructure Development of Ultrafine-grained Cu Processed by ECAP
Technical purity Cu (99.95 wt%) polycrystals have been processed at room temperature by equal channel angular pressing. The results of mechanical tests and the microstructure characterization by various experimental techniques are presented. The yield stress as well as the strength were shown to increase with increasing strain and exceed the respective values of a coarse-grained material. The m...
متن کاملImproving the Microstructure, Mechanical and Magnetic Properties of AISI 4340 Steel Using the Heat Treatment Process
AISI 4340 steel is one of the super strong steels that can be selected for different applications. By designing the proper cycles of heat treatment, the optimum microstructure and properties of this steel can be achieved. In this study, different heat treatment cycles were introduced to achieve the optimum microstructure and improve the mechanical and magnetic properties of AISI 4340 steel. The...
متن کاملMicrostructure evolution and mechanical properties of Mo40/C93200 bimetal processed by compound casting process
Compound casting refers to a process that used to produce bimetals. This study investigates the interface of Mo40/C93200 that is produced by compound casting process. In this research, molten bronze is poured around steel core, interaction between liquid and solid creates a diffusion zone and followed by a transition layer which leads to the creation of diffused region between the interfaces of...
متن کاملMicrostructure and Mechanical Properties of Cold Rolled AISI 304L and 316L Austenitic Stainless Steels during Reversion Annealing
Microstructural evolutions during annealing of cold rolled AISI 304L and AISI 316L stainless steels were studied. Cold rolled AISI 304L alloy was fully martensitic but cold rolled AISI 316L alloy was partially martensitic due to the higher stability of the austenite phase in the latter. During continuous heating to elevated temperatures, the complete reversion of strain-induced martensite at 75...
متن کاملMicrostructure and mechanical properties evaluation of diffusion bonded joints of titanium to AISI 304 austenitic stainless steel
In this study, diffusion bonding between titanium and AISI 304 austenitic stainless steel by Ag interlayer was investigated. In order to carry out this research, samples prepared after surface preparation were placed inside the fixture and placed at the temperatures of 750,800 and 850 °C in the 30,60 and 90 min in the furnace under argon protective gas. The phase transformation and microstructu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Universitas Scientiarum
سال: 2014
ISSN: 2027-1352,0122-7483
DOI: 10.11144/javeriana.sc19-2.mpma