Microstructure and mechanical properties in hot-forged liquid-phase-sintered silicon carbide
نویسندگان
چکیده
منابع مشابه
Microstructure Evolution and Mechanical Properties Improvement in Liquid-Phase-Sintered Hydroxyapatite by Laser Sintering
CaO-Al₂O₃-SiO₂ (CAS) as a liquid phase was introduced into hydroxyapatite (HAp) to prepare bone scaffolds. The effects of the CAS content (1, 2, 3, 4 and 5 wt%) on microstructure and mechanical properties of HAp ceramics were investigated. The optimal compression strength, fracture toughness and Vickers hardness reached 22.22 MPa, 1.68 MPa·m1/2 and 4.47 GPa when 3 wt% CAS was added, which were ...
متن کاملMicrostructure and Fracture Toughness of Hot-Pressed Silicon Carbide Reinforced with Silicon Carbide Whisker
The effects of p-Sic whisker addition on the microstructural evolution and fracture toughness (K,c) of hot-pressed SIC were investigated. Most of the whiskers added disappeared during the densification process by transformation into the a-phase. The remaining whiskers acted as nuclei for grain growth, resulting in the formation of large tabular grains around the whiskers. The tabular grains aro...
متن کاملMicrostructure and mechanical properties of pressureless sintered alumina-silver composites
The silver toughened alumina ceramics, which were fabricated via a conventional ceramic processing route using commercially available alumina and silver oxide powders as the starting materials, exhibit a higher fracture toughness (6 to 9 MPamo.5) than the monolithic alumina ceramic ( 2.5 to 3.0 MPamo.5). The weak interfacial bonding between the silver inclusions and the alumina matrix is charac...
متن کاملMechanical Properties of Amorphous Silicon Carbide
Excellent physical and chemical properties make silicon carbide (SiC) a prominent candidate for a variety of applications, including high-temperature, high-power, and high-frequency and optoelectronic devices, structural component in fusion reactors, cladding material for gas-cooled fission reactors, and an inert matrix for the transmutation of Pu(Katoh, Y. et al., 2007; Snead, L. L. et al., 20...
متن کاملMicrostructure and Mechanical properties of Multipass Friction Stir Processed Aluminum Silicon Carbide Metal Matrix
Abstrct :In this study, SiC particles were incorporated by using Friction Stir Processing (FSP) into the 6351 aluminium alloy to form particulate composite materials. Sampels were subjected to constant rotational and traverse speeds of the FSP tool with and without SiC reinforcements. Microstructural observations were carried out by employing optical microscopy of the modifiedsurfaces. Mechanic...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Korea Academia-Industrial cooperation Society
سال: 2010
ISSN: 1975-4701
DOI: 10.5762/kais.2010.11.6.1943